Toyota 4AGE 20V With 293° Cams On The Dyno

Toyota 1.6L 20V With 293° Cams,20Thou Bore,Balanced Sub Assembly,Toda Valve Springs & Dicktator Management With Viper Branch & 63mm Exhaust Being Tuned On The Dyno.

Results - 140Kw 181Nm On The Flywheel.

[SidewaysGts]

Hey! Seems like you still keep an eye on this? Awesome video.

Just wanted to verify- That was 140 kw to the "flywheel", not what was measured at the wheels themselves?

Do you remember (or can you find out) what was actually recorded at the wheels with this set up? Thanks!

[davidloren]

i would like to know about your idling ... is the idle still smooth after installing 293 cams?  .. thanks ... im planning on buying the tomei poncams for my future 20v build ...

[AndrewHarvey-CerberusSoftware]

How much lift, and what compression ratio?

[SkalabalaK]

At what rpm did the tuner set the vvt to switch off? You loose power high up if its on.

[herschelsinglee]

9.5mm lift.Comp ratio is 11.8:1 on 95 pump fuel

[AndrewHarvey-CerberusSoftware]

I wonder why it stops making power at 8000 rpm. I would have though those cams would pull to 10000. What centreline did you use for the intake cam?

[AndrewHarvey-CerberusSoftware]

Do you have a dyno from before the upgrades?

[JD]

Hi, I know this is years later, but did u do anything to the valves?

[herschelsinglee]

Makes power till 8000RPM.Limiter is set to 8300RPM

[derrickquintal]

Sounds great, but that seems like a really shit place to stand during a pull.