how to install a 4 channel amp to a factory radio using audio integration harness ford f150

how to install a 4 channel amp to a factory radio with audio integration harness on a Ford f150
This is a car audio how to tutorial that will show you how to install a 4 channel to a Ford f150 factory radio
*SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS *radio removals, radio installs, speaker replacement, speaker installs, car audio reviews and much more.
🔻
*Parts used for this install are:*

TAGS: ##caraudioinstallation #amplifier #fordf150
🔻
*Did this video help you? Want to support the Channel? Show Your Support on:*
JP'S AUDIO✅️
OR
Patreon
🔻
*WHAT TO WATCH NEXT:*
*CAR STEREO TROUBLESHOOTING*
*AMP TROUBLESHOOTING*
🔻
🔻
*~Tools I Use almost everyday~*

[thatguykai]

PAC T advances harness inputs( to amp) go to RCAs if your amp can convert high to low giving signal to speakers without re wiring. Outputs from the other side of the amp Phillips screws go to output (from amp) making one big circle. subwoofer will bounce off the rear signal so then jsut connect the subs to Phillips screws on the amp also known as low level this would apply to 5 channel. I plan on doing this next month took a lot of time to learn but thankfully I got on the phone with Crutchfield and they broke it down. If running components you will need crossover if you have coaxial you will not need, built in cross over already in coaxial . When running inputs to the RCA (TO AMP) you can run a Lc7i etc to clean the stock audio roll off with it attach ferrules then RCA to other side still connecting to high inputs. Hope this helps

It’s the same price purchasing the speedwire because you will need two in total about 55 60 bucks and the extension for the pac is 60. Crutchfield can walk you through set up if you purchase through them

[ronjackson]

How would i be able to do this from my factory head unit, i would like to add an amplifier to run out of factory door speaker wires and also a subwoofer amp but where would i get RCA signal from?

[davidmoscufo]

Hey man, nice video. I have a 2016 F250 with the Sony system. Looking for some help to amplify front components speakers and maybe upgrade the sub.

[gsxrjt]

Do you have any harness kits for 2021 f150 non amp 6 speaker non B&O radios? If not any info on where I can get one?

[sierraproductions]

Nice im going to order for mine with the sony stereo but how would i also add a bass amp and 4 channel with only 4 outputs and also the door speakers are going to be 300 watts rms each should i upgrade the wiring for them?

[slowbrezze]

is that same harness fird edge 2013 uses

[magictoaster]

Correct me if I’m wrong, but doesn’t that Kicker CX amplifier you’re connecting to already have high level inputs so there was no need to run a Line Output Convertor?

[abhinavgarg]

How do I know if I need a powered or unpowered LOC? I have a ford focus and would get that PAC T-harness

[ashtonseale]

Will this harness work for non amplified 2020 f150 with the big screen? Thanks.

[gloriasaulter]

Where can I buy those wiring harnesses