VMP Odin Level 2 Supercharger Kit || Dyno Baseline and Upgrades

In today's video, our '18 Mustang GT A10 is back and ready to lay down even more power!

After our Loki Level 1 supercharger kit testing, we've now upgraded this '18 GT with our Odin Level 2 configuration. It gets a baseline pull to establish the difference in power between Loki Level 1 and Odin Level 2, then Justin twists on it a touch harder with a pulley swap to show how responsive the Odin Level 2 kit is to simple modifications.

As our "Level 2" supercharger kit, the VMP Odin Level 2 picks up where the Loki Level 1 leaves off and creates a foundation for your big power goals!

For more information or to grab an Odin Level 2 kit for your Mustang, hit the links below!

► VMP Odin Level 2 Supercharger kit for '18+ Mustang GT:

► Subscribe & Follow

[Kurtage]

I’ve had an Odin on my 22 for a little over a year now and have been running the 85mm along with catted long tubes and a catback.
It feels great!!

[mestons]

I get my Odin in 5 days my winter project sucks where I live 91 octane is the highest boosting is the big thing thanks for all the great information I am really enjoying the videos

[Oliver-ftfq]

You guys done a great job with magnuson. You should develop a bigger 3.0 or bigger Odin to compete with whipple bigger superchargers for the gen 3 coyote. I’ll buy it in a heartbeat 👍

[HugerAlexander]

Can y'all do a video on a belt change on the Vmp Odin far as smaller pulleys goes being that your drive system is closer to the block then whipple

[markuaw]

Over 700 rear-wheel horsepower, on 93 pump gas. running 13 lb of boost did I hear all that right ?

[Bloodwolvz]

I want the Odin on my ‘12 S197. have to upgrade my engine and trans first before I send it over to y’all 🤙

[hutch]

49 state legal. Guessing not in Commiefornia?

[michaels.]

Does the Odin kit fit a 2021 mustang Mach 1?

[johnmilner]

I bought the loki for a gen 2 f150 motor.. how do I upgrade it to make it a odin?

[SVTPerformance]

Great vid showing that PD blowers hate intake restrictions.

[TheLoneWolf_andCoyote]

Did you use a 3.3 pulley on your pulley swap Justin? I was curious if I could use a 3.3 pulley on my Odin with some Sunoco 105 unleaded fuel in the tank and my existing tune file? and would a smaller pulley require a shorter length belt? My Odin is getting broken in with some Southern Arizona 109-110 degree weather this week. IAT'S are staying in the 140's buried in heavy traffic.

[dmacthetruth]

How much we talking for the gen 2's? I'm thinking maybe around 700 with the level 2 and pulley. Been tossing up between odin or twin turbos around the 700rwhp mark.

[freedom]

Wonder what that 3.3 would make on e85

[liljojo]

So can I swap pulleys on 93? I have always been told not to pully down without going E85.

[lasmilybaby]

Can the mt82 6 speed manual handle this or does it need to be upgraded?

[Real_Richmond_]

What is the one state it isn't legal in? California?

[jeffbrock]

My Odin doesn’t whine at all with the 88mm. Should I hear it?

[justinjess]

Can you tune the Odin for 91 or is the Loki a better choice?

[savage.]

What all do i need to be right around 700hp in my stock 22' GT?

[Blood_Dragon]

the only thing I'm scared is how the 10r80 is going to handle this amount of pwr, from what I hear it starts being unreliable around 700 hp.