Satellite LNB Frequency Setup is a VERY Important step

Satellite LNB Frequency Setup is a VERY Important step
LNB Frequency setup in your Satellite TV Receiver is VERY IMPORTANT!
Setting the LNB frequency correctly allows your receiver to calculate where to find the channels your satellite dish picks up. If it's not set correctly, you won't receive any channels.

Standard KU Band LNB- 10750 MHz
Universal KU Band LNB- 9750-10600 MHz
C-Band LNB- 5150 MHZ
C-Band One Cable Solution (OCS) LNB- 5150-5750 MHz

Visit my Youtube Channel:

Ku Band Satellite LNB’s -how they work and Frequency Setting

How to Run a Blindscan on the Amiko Mini Free Satellite TV Receiver

Amiko Mini 4K UHD S2X Free Satellite Receiver | Review and Overview | Get FTA Satellite Channels

How to PVR Record | Amiko Mini HD265 | FTA Free Satellite Receiver

Adding and Organizing Favorite Channel Lists in your Amiko FTA Receiver | Free Satellite TV

Amiko Mini Free Satellite TV Receiver - Auto Power Down Setting

How to Add a Satellite and Transponder to the Amiko Mini HD265 FTA Satellite Receiver

How to Delete Channels on the Amiko Mini Free Satellite TV Receiver

How to Rename a Channel on your Amiko FTA Satellite Receiver

Adding a Transponder to a Satellite- Amiko Mini HD265 Receiver for free satellite TV

Missing channels after a Blindscan?Manually add a transponder to a satellite receiver

Over-the-Air TV and TV Antennas Playlist:

TV Antenna Reviews Playlist:

TV Channel Scan Tutorials Playlist:

Free Satellite TV: a Great Choice

Learn about how to get free satellite TV:

Setting up a Basic KU Band Satellite System for Free Satellite TV

My C-Band Satellite Dishes:

[Nicholas_Chris]

The European Ku LNBs have the frequency 10.75 to 12.75 Ghz. Low Band is 10.75 - 11.75 Ghz and High Band is 11.75 - 12.75 Ghz.

[Nicholas_Chris]

I remember back in 2018 when I was new into satellite TV and I added a couple of satellite and all of them were broadcasting only on Ku Band. And I was wondering why I have no signal on that satellite since the frequency, polarization and SR were correct. I clicked TP Scan, blind scan and I saw that the frequencies were for C Band and was wondering why the Ku Band have C Band frequencies since my LNB is Ku Band and scanned only half of channels? The conclusion was that I forgot to change to Universal instead of Standard at LNB Type. Beginners mistakes.

[red]

Just curious how you felt about one of those multi-feed lnb brackets that goes on a dash

[zbigniewpierozynski]

What kind of LNB must be determined when the receiver is connected to Multiswitch and Quatro LNB.

[arisntivartzis]

So ..once i set the right frequency i see all channels..have to do this on both receivers? secondly will i have the issue of polarity? please tell me on the first what will be the settings of lnb and the second i have receiver .. than you so much sir!

[johnspivey]

Where can I buy amino 265other than eBay? Please respond.

[rfplaysgames]

I would like to eventually get, at least, a Ku band dish to play with, however I don't have the money right now.😢 For the time, at least, I have both yours & Robbie Strike's (The Happy Satellite Nerd) videos to watch.