filmov
tv
Reset Printer Brother DCP-J140W 'clean unable 50'
Показать описание
1. Press the Set/OK button, then Menu, then Mono Start followed by the up arrow key four times. These buttons have to be pressed independently and should be done in rapid succession. If you have done this stage right you should be presented with the word ‘maintenance’.
2. Using the Up/Down arrow keys select the number 8 and then press Set/OK. Then select the number 0 and then press Set/OK.
3. At this point we need to get in to the Purge option which, depending on the machine will either be a case of pressing Mono Start repeatedly or using the Up/Down arrow. We recommend trying one method and if it isn’t right for your machine turn the printer off and back on again, start the process from the beginning then try the second method.
4. Once PURGE is on the screen (usually the word purge will be followed by a reading indicating how much ink has been deposited) use the up/down arrows and the set/ok key again to enter the numbers 2, 7, 8 and then 3 on the screen.
5. The number after PURGE should now reset to zero. Press the Stop/Exit key to go back to the main maintenance mode menu.
6. Using the up/down and SET/OK keys enter 9 and then 9 again to exit maintenance mode.
2. Using the Up/Down arrow keys select the number 8 and then press Set/OK. Then select the number 0 and then press Set/OK.
3. At this point we need to get in to the Purge option which, depending on the machine will either be a case of pressing Mono Start repeatedly or using the Up/Down arrow. We recommend trying one method and if it isn’t right for your machine turn the printer off and back on again, start the process from the beginning then try the second method.
4. Once PURGE is on the screen (usually the word purge will be followed by a reading indicating how much ink has been deposited) use the up/down arrows and the set/ok key again to enter the numbers 2, 7, 8 and then 3 on the screen.
5. The number after PURGE should now reset to zero. Press the Stop/Exit key to go back to the main maintenance mode menu.
6. Using the up/down and SET/OK keys enter 9 and then 9 again to exit maintenance mode.
Комментарии