Ender-3 SD Card Extension Adapter Mount

Visit my FIVERR profile if you want me to make some cool 3D printable designs for you.
I can shape your IDEA into a REAL FUNCTIONAL PRODUCT.
↓

This is SD Card Extension Adaptor Mount for Creality Ender-3.
SD Card Extension Adaptor is used as the SD Card slot in the printer is in difficult to insert position. This Mount is attached to the Printer frame by an M3 screw, approx 7 mm long and one T-nut. To hold the adapter firmly, one more m3 screw is also used.
M3 screw and T-nut are readily available in AliExpress/Banggood for the very cheap price.
thingiverse link
The design is updated on 7/28.

Get Micro SD Extension Adaptor here:

Please subscribe my channel to support me.

[marcelrios]

It happens to me that you read the card but when you remove it and place it again you don't have to restart the printer, does that happen to you?

[billbyrd]

The problem I've found with these ribbon adapters is that the male end does not latch in the Ender3 port. I ordered two of them and neither one of them will latch. Many others have complained as well. If you know of a particular brand that will latch, please let us know. Thanks.

[washingtonstatepicker]

My extension will not work with your design...i need to find a bigger mount.
Great design though!

[geocodejunkie]

Any chance of you sharing the source file and / or modifying to include a bottom and side to keep the cable fully contained for those of us that move the printer around (i.e. to keep the cable contained during moving)

[williamwolfe]

Great video please play with new music. Thanks again!

[Nekonomikon]

Can you make a version totally closed ?

[ecocharged]

What brand filament is that? I LOVE the color!

[mr.smithsgovermentclass]

Thank you for this video. Very helpful. :-)

I noticed the glass on top of the printing bed. I assume there is a benefit to doing this, what was your logic?

[brianzimmer]

I see your Cura program is setup with an Ender-3 printer. Is that something you setup yourself of was it within the software already? I didnt have that in my version 3.3.1 Cura (Linux)