Apollo Scooters - Advanced Settings Guide

Step-by-step guide to advanced settings for the Apollo scooters (Light, City, Explore, Pro).

[Namkhai_de_Combaillaux]

Great video, thanks !

For quick reference :
Mode + PWR (2s) →Settings
Next Setting = PWR
Change Setting = MODE


P01 = Brightness
P02 = MPH/KPH (0=km, 1=mph)
P03 = Battery Voltage
P04 = Auto-Off Timer
P05 = UNUSED
P06 = Wheel Diameter (Inches)
P07 = Motor Calibration. DO NOT MODIFY. Default = 028
P08 = Power Level in %
P09 = Start Method (0=no kick'n'go ; 1=kick'n'go)
P10 = UNUSED
P11 = Regen Capacity (from 0 to 5 ; 3 is advised if used)
P12 = Acceleration Level (from 0 to 5)
P13 = UNUSED
P14 = UNUSED
P15 = Voltage auto shutdown level (tension de coupure. Recommanded 39V)
P16 = Odometer Reset (only if Odo <100kms)
P17 = Cuise Control (0=Off : 1=On)
P18-P20 = UNUSED

[ZeeCaptainRon]

it would be REALLY useful to have this printed in the manual, or even as a pdf on your website. Why make this so difficult to find?

[Sunset]

Been riding the explore from Manhattan to the edge of the Bronx leading into Westchester county 4 days a week. With the proper protection you could keep up with city traffic no problems. I make it from 28th street to Mosholu Pkwy in 40-50 minutes just as long as waiting and riding the MTA. GREAT PURCHASE SO FAR!!

[russo]

I had my Ghost on 3 acceleration for over a year until I seen this vid...on 5 now holy feck she takes off hard now haha...thanks dude

[JP-nexj]

Here’s the summary for easy reference. Also added some safety recommendations for the Apollo Pro

Turn on scooter my turning the key and pressing power button for 2 seconds.
Press power and mode button at same time for 1 second to go into settings mode. Once in settings mode, Power button goes to next setting. Mode button changes inside the setting.
P1 - Brightness setting 03 being brightest.
P2 - km or miles
P3 - Voltage. For the Apollo Pro 52 volt scooter this should be set at 52. Otherwise the fuel indicator will show only 3 bars when it’s full. All other scooters leave as already set unless you have fuel indicator problems.
P4 - Minutes before shutoff
P5 - Don’t touch
P6 - Wheel diameter of your scooter Leave as is.
P7 - Magnets of your motor. Don’t touch
P8 - Power Level. Set at 100
P9 - Push off mode. 0 is throttle at rest. 01 is push off safety mode. For powerful scooters such as the Pro I recommend 01. Bad things happen with instant throttle.
P10 - Unused setting - Don’t touch
P11 - Regen mode. Apollo recommends 03
P12 - Acceleration. Apollo recommends 05. I recommend 03 or less for Apollo Pro especially for beginner riders. 05 will give you some jerky acceleration with dual motors on that takes time to adapt.
P13 and P14 unused.
P15 - Automatic scooter voltage shut down level. Don’t touch.
P16 - Lifetime Odometer reset. Only works under 100km
P17 - Cruise control. 00 is off, 01 is on. Apollo recommends off.
P18 to P20 all unused. Don’t touch.

[ElectricRevolution]

Simple and fast, love it, I wish all companies did something like this. Thanks!

[craigweston]

This was just spot on. I just spent over $2000 on my Carbon Oxy 10 here in Australia and the shop I got it from did not tell me about any of this.

[maxgarascia]

Chris, put your helmet on strap on a GoPro and give us a ride review already.

[Billy]

Are there any hacks to make it go faster?

[alexrudner]

Hi thanks. I got new Apollo ghost and check all p setting with your help. No clear with eco turbo button. When pressed down and when released up. I cannot feel difference red button is clear how to use. Thanks

[tirbomax]

just got my pro today...cant wait to go for a rip later!

[davidvosk]

Great video, thanks for the content

Very informative 👍🏻👍🏻👍🏻

[Letsgetmad]

My battery show it’s full even if it’s dead! How do i fix that? Because i want to see the actual battery level

[reinhardgentz]

I need some help with p11: if i set it to 0 i can coast very nice but i dont get any regeneration when i brake. When i choose 5 i have nice regenerative breaking when i press the breaks but also crusing seems slower. Can i have regen while breaking but coast when im doing nothing

[addaniel]

Is there a way to set a speed limit on the scooter? I know you can on the apollo air with the app but the ghost doesn't have an app with it

[christianb]

What should the P15 setting be set to for the Ghost? Mine is set to 19

[johnglennie]

When using cruise control, how do you get out of it? Hit brake? Push button?

[Riomojo]

Thank you sir, had no idea. Where can I stay informed as to whether the unused modes ever become active?

[BSAElectronics]

Hi guys I just received my Apollo Explore electric scooter today it is a pretty well made unit. In the manual it repeatedly refers to only charging the scooter to 75% if it is going to be stored but nowhere in the manual does it explain HOW to limit the charge to only 75%, is this something that is done in one of the menus you show in this video that "isn't used", why is it not covered in the manual?

[showiceland]

Hi i have about battery setting when start speed scooter apollo ghost the scooter is fully charge but i start driving the charge milage come down to one or two bar on screen when i stop the charge is full again what is problem