vSphere 6.5 - How to Create VM in VMware ESXi 6.5 - Complete Lab Setup [AskJoyB]

Показать описание

How to Install ESX 6.5 in VMware Workstation - Complete Lab Setup

*************************************************
ESXi Hardware Requirements

Make sure the host meets the minimum hardware configurations supported by ESXi 6.0.
Hardware and System Resources
To install or upgrade ESXi 6.0, your hardware and system resources must meet the following requirements:
■
■
ESXi 6.0 requires a host machine with at least two CPU cores.
■
■
ESXi 6.0 requires the NX/XD bit to be enabled for the CPU in the BIOS.
■
ESXi requires a minimum of 4GB of physical RAM. It is recommended to provide at least 8 GB of RAM to run virtual machines in typical production environments.
■
To support 64-bit virtual machines, support for hardware virtualization (Intel VT-x or AMD RVI) must be enabled on x64 CPUs.
■
■
SCSI disk or a local, non-network, RAID LUN with unpartitioned space for the virtual machines.
■
For Serial ATA (SATA), a disk connected through supported SAS controllers or supported on-board SATA controllers. SATA disks will be considered remote, not local. These disks will not be used as a scratch partition by default because they are seen as remote.
Note
You cannot connect a SATA CD-ROM device to a virtual machine on an ESXi 6.0 host. To use the SATA CD-ROM device, you must use IDE emulation mode.

**************************************

All AIK IT Support Trainings Now on Skillshare

****************************************************************

****************************************************
****************************************************