Homemade DIY CNC - KR33v1 CNC Enclosure - Part 4 Final - Neo7CNC.com

Help support Neo7CNC:

#neo7cnc #davidburrell #diycnc #homemadecnc #makerofthings

[UberAlphaSirus]

I recon a bit of formica on birch ply or flooring grade water resistant chip board would make a great base. That rattling will drive ya nuts when the machine is running, a different part will rattle on a different cut. while its all clean it might be good to slide all the panels out and bed them in the slots with sealant then give them a nice bead when back together otherwise coolants gonna build up and seep out of every orifice. The static will die down after few uses.

[trevorburke]

Try using some formwork plywood with the black coating. That stuff is perfect.

[cncdavenz]

Hi Dave, Maybe you could add a small extractor fan to the cabinet ducted outside to get ride of any fumes and dust.
The cabinet looks fantastic I am very jealous. Cheers Dave.

[OwThatsMyEye]

You could try painting the plywood with something like Flexseal or Plasti Dip.

[FLyyyT_]

maybe some covers on the slots of the aluminum extrusions inside the enclosure. so debris less likely to get in there.