ESU TECH TIP: Using CV 54 for Auto Adjusting BEMF

Having problems with the running condition of your locomotives? Join Ron in a Tech Tip to help your ESU equipped locomotives run even better!

For more info please visit:

[NickelPlateRoadExperience]

This improved the performance of my Bowser DS 4-4-1000, Every ESU decoder should have this set up completed.

[kleinvosseven]

Thank you for this interesting video, do you also have a video concering cv 3 cv 4 cv 5 and 6, how to instal the speed/ correct valeu when the train depart the station ore has to stop for a signal. best regards henk

[adder]

I find this to work well on level track. As soon as a 2% gradient is encountered, the uneven motion is still there, especially at slow speeds. Often, further fine tuning is need.

[RanmoreCommonRailway]

which decoders does this work for? i have lokpilot basic chips and it doesnt seems to have the capabilities

[thetrainrev]

Is this process only good for ESU decoders (et al)?

[keithmassey]

Is it possible to use the programming track to make this adjustment or does it have to be the main track?
My Ecos is set up with a programming track.

[josepsfs]

Can I use this cv54 procedure in a Motorola (MM) enviroment ?

[duckdogger]

On my NCE controllers, F1 is the bell!. Nothing happens except the bell rings. What is the regular control equivalent for F!???

[pedropons]

While I really enjoy all the help from ESU I noticed with this video using CV54 that the adjustments to this CV 54 is meant for ECO decoders. I don't mean this as criticism rather just an observation.

[SheltonDCruz]

is this also relevant for v5 Loksound Decoders?