Xtool D1 Pro First Cleaning. How To Clean Your Diode Laser Engraver and Cutter. #laser #xtool

Video showing you guys the first cleaning we did on the new laser. Was actually surprised about the amount of dust on the lense with the amount of work we have done with it. When we get some of our ideas fleshed out here and get this thing pumping out orders, I would expect to be cleaning it at minimum once a week, maybe even twice if we are busy enough.

[Sophie_]

noticed the grill being used instead of an overpriced honeycomb. Ingenious! You just saved me over $100

[connieterry]

I'm cleaning mine today, and I'm a bit nervous. Thank you for making this video and sharing!

[darkwave]

Thanks! Very helpful. Had a bit of an accident cutting in wood with lots of resin in it. It caught fire but fortunatly only the plastic was damaged, but quite a lot of soot that I had to clean up. This video helped!

[logistixmedia]

Excellent video and instruction. Took me about 4 minutes to clean. I used isopropyl alcohol. My laser works just like NEW!

[robinslater]

Thanks, I've beyond imagination & was afraid to clean it & moved more to my F1 for fear I abused my D1 10w pro... off to cleaning, saving this video ❤

[LuanneRamsey]

Your video is so good, I followed your instructions but I have a problem, I need help. Now I do not have the laser light when I try to cut. I took off the nozzle again and I have one. When put back together I do not. I don't know what to do. My nozzle has no blockages. Please help.

[mrsdizi]

thank you how would you clean the top where the fan is?

[charlesfield]

Does the laser leave a mark where it crosses the supporting rack's wires? I'm looking for a better solution and the rack looks like it works nicely.

[boninm]

He sound like a wound care nurse. Cleaning in a little circle from the inside out. Lol.

[VuTran-hl]

How to replace the laser module cooling fan? I have removed 4 screws on top of the fan cover and 2 screws on the back of the module but unable to remove the circuit board. I am just wondering if you have experience with this. Thank you.

[mrsdizi]

I just followed and instead of cleaning I replaced my lense now it wont cut thru at all any ideas?

[jamesmott]

Can I use acetone instead of the rubbing alcohol?

[Monkey_Snot]

You should be using denatured alcohol, not regular household alcohol. Regular alcohol will leave a haze on the lens, denatured alcohol is designed for laser lenses, cameras, cd/dvd laser lenses etc.

[jppalm]

Cleaning should not be awkward. Busy labors need cleaned EVERYDAY.
Should be much more convenient