Odies vs Osmo vs Rubio - Search for the ULTIMATE WOODWORKING FINISH

Finding the best premium finish/stain/oil/wax for fine woodworking. A liquid and scratch resistance test for Odie's Oil original vs Osmo Polyx 3043 vs Rubio Monocoat Oil Plus 2C. Plus application instructions for all three of the most popular high end woodworking finishes. These finishes go head-to-head on some black walnut and black walnut charcuterie board testing their resistance to water exposure and cup rings, and scratches.

Product Links: (if you're going to buy on amazon, please use the links below as it won't cost you anymore but I get a small commision to keep making videos!)

[OsmoCanada]

Hi Drew. Thanks for including us in your comparison. In order to achieve full stain resistance with Osmo it is advisable to roll or brush the finish onto the surface and allow it to dry without buffing away the excess. White pads and rags apply the finish very thinly, and so 2-3 coats using this method will leave behind a fraction of the finish versus 2-coats with a brush or a roller. This means reduced stain resistance as you have found here. Bear in mind Osmo is designed to be rolled and brushed to achieve the highest durability. So to improve the stain resistance we'd suggest to roll or brush two coats onto the surface and allowing the finish to dry (do not wipe the finish off). After the second coat has dried, you can lightly scuff sand the surface with a maroon pad or P320 grit and buff in 1-2 coats using the method you used in this video. Once done and cured, you should find that the Osmo has at least 24-hour resistance to the liquids you placed on the surface. Hope this helps

[sgoldste]

Nice video. The only thing I wish you added was after your scratch test comparison, if you applied another coat of each product to see how well they repair the damage on both sides of the boards.

[efxxcjh]

Great video! I love my Odie's! My favorite approach is to sand to 400/500 grit for semi gloss, apply one coat of Odie's followed by wood butter or 2 coats of Odie's - and is totally bullet proof! my countertops after one year still look amazing, I had some small scratches but were easily spot repaired! Now my new favorites are the Odie's stains, omg what a game changer, especially for wood floors or outdoor projects- you get the maximum UV protection!

[cgrovespsyd]

Of the three, I have only used Odie’s Oil. However, i have had very good results applying two coats of Velvit Oil (food safe after it drys), which is a penetrating oil. After it has dried thoroughly, I apply Odie’s oil per manufacturer’s directions. Velvit Oil provides deeper protection and visually pops the grain out and Odie’s Oil gives a nice sheen and better surface protection.

[sm]

One benefit to Odies (those of us who don’t have a proper wood shop) is that it can be applied and especially reapplied indoors- in situ if you will- if needs be to larger furniture pieces.

[hopefullyhelpful]

Drew, now that it's summer I'd love to see you do a video, Search for the ultimate outdoor woodworking finish.

[dbnoho]

I just finished a wine cabinet with odies oil. So far, I love it. I liked being able to go gloveless and maskless. However as much as I love it, putting it on a large’ish cabinet was a lot of effort to say the least. Just take off your shirt and flex. Because those circular motions will get you jacked.

I’ve also used tried and true on bathroom cabinets and I love it. But, be very warned. If you put on even a micron extra, it can take days to dry. The finished result is smooth and spectacular, but I made 3 cabinets. One was ready in a day, another a day and a half. Another was 5 day wait. However I left them outside, it randomly rained (summer in California. Unheard of) and they all got soaked. But the tried and true had set enough that I wiped it right off. No issues at all.

So larger things. I might stick with tried and true because of its simplicity. But that odies oil is pleasant. You just gotta have some time and elbow grease.

Ps. I plan(Ned) on using Osmo. But randomly it got banned where I live. But I can drive 30 miles west and it’s allowed. So, that’s stupid. But, California buddy. Welcome!

Ps.
What killed that fly 12 minutes into the video? You. The finishes? The gases? Is that part of the test? This finish will kill flies?

[duckhunter]

Fantastic video. I just subscribed. Note that with Odie's oil, you can easily add a coat of Odie's hard wax on top of the oil. It provides more protection than the oil alone.

[BeauDobbs]

I use Osmo top oil for food surfaces. It does take 3 coats but it holds up great to everything I've thrown at it

[kellyg]

Thanks for taking the time to do this comparison. It was great. I too like to use Rubio. I’ve had zero problems or complaints and it is so easy to apply.

[TheRealBigfeet]

What a beautiful gift for his parents to have, a specially crafted table by their son, it’s a stunning build and I hope they appreciate how skilled you are.

[LiloUkulele]

Great video!!!...one test I might recommend is a cup of hot liquid...pretty common around dining tables. I'm getting ready to take off a nitro lac finish on a big bubinga dining table-deep scratches, milky clouds from hot items. Love the look and feel of the finishes you presented...perhaps wear and tear and the inevitable refinish is just part of the program...Thanks again for a great video

[Asian]

I liked all three, I think only skillful people can tell the difference, , wonderful 👌🙏.

[LoganLovell]

I've used Odie's on the past few projects I've done, namely a coffee table. I'm very pleased with how easily it goes on and how durable it is (i sometimes spill or forget coasters and the surface still looks brand new). I'm thinking about switching to Rubio as my main finish because I think I like the sheen a little more and I think there's a lot more versatility in the color than with Odie's. This video was certainly helpful in deciding if it makes sense to switch between finishes or just stick with one.

[bunnylovenuts]

I liked the music - not too loud, not too aggressive and didn't interfere with the voice-over. Good video, thanks for posting.

[LivingNorDead]

Great video, I would like to point out that osmo has a 2-3week true cure time according to their tds, and running tests before that time does kinda smudge your durability test results. You are supposed to really baby what it's applied to during that cure window

[jwayneair]

Only sand for Rubio up to 120. It leaves the pores more open and allows better penetration, which gives better protection. Also using a squeegee to apply it on will allow it to absorb better (it’s akin to using a trowel for sheetrock mud or plaster), as a white pad/cloth/rag will absorb more than the wood, making it difficult for the wood to absorb all it can. Then use a white pad to work it in and ensure an even coat. Use a cloth/rag to remove the excess as it’ll more efficiently do so due to said absorption and will smooth over perfectly on the epoxy. For a second coat, some will say to gently go over it with 240, wipe down, and apply. I’ve had great success with simply wiping down and applying, the chatoyance it’ll bring out in walnut is simply stunning, like nothing else can achieve.

[betsybecker]

I had students put together a live edge walnut coffee table. We used Ice Epoxy for the river and Rubio Monocoat Pure for the finish. Because of your video (and a couple of others), we did scuff either a burgundy pad and reapply a 2nd coat. Thanks for the tips!

[takeniteasyfriend]

🏆 Impressive comparison ☝️
Particularly liked the scratch tests on both the wood & epoxy. Many videos on applying, but few show the durability under practical conditions. Really appreciate this one
Look forward to seeing more of the channel 👍

[adammarcello]

This is the best comparison video I have ever seen regarding any product on YouTube…..period. I bought the Odie’s Oil to refinish a heart pine countertop in my kitchen based on the fact that we use this countertop as a “bar” and open bottles of red wine on it and according to your video…it has the most stain resistance. I can say that I DO NOT LIKE the look of the finish…it is very dark and matte. From now on….I will use pure 100 percent Tung Oil in my kitchen and bath where surfaces are constantly exposed to water and other liquids. It’s just the best and I have never had any issues with it….Give it a try (maybe another video idea?). However, based on your video….I bought Rubio and will use this product from now on for all my furniture. SUBSCRIBED and Binge watching all of your videos.