Harbor freight hydraulic ram

what's going on everybody rob here with a little video going over my harbor freight hydraulic ram. Purchased this hydraulic freight hydraulic ram this harbor freight hydraulic ram in order to pull and push a unibody. There was a car that was completely rear ended and looked atrocious. Person did not have the deductible to pay to have the car drivable. What I did was I purchased this harbor freight hydraulic ram because I knew I would use it in the future again. The 8000 pound hydraulic ram from harbor freight. I also did buy a 1.5 ton chain hoist. I also used a chain hoist to pull the unibody from the car as I pushed out the unibody with this hydraulic ram. This hydraulic ram is pretty awesome I did put a 6 by 6 piece of wood inside of the vehicle to brace this 8000 pound hydraulic ram when I pushed out the unibody. It is in my youtube channel if you want to see it straightening out a unibody with a harbor freight hydraulic ram

[kaptainasskrak]

This is a very useful tool. I work on boats, boats don't have frames ok. But the engines need to be aligned to the prop shaft within .003 of an inch. And this the tool to move those huge marine gas and diesel engines.
This guy does miss an important fact, the spreader that wedge shape tool, it only has a capacity of 2 ton. Thats because of the shape and the mechanism.
Alot people call this a Porta-Power, that is the brand that originally designed this. So every manufacturer calls it something else, maybe a Frame & Body hydraulic tool. This tool is a pusher, not a puller.