How to Change Tie Rods (inner and outer tie rod ends)

How to replace inner and outer tie rods. This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it!

**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday**

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

[ZackJenkins]

Dude you've been saving my ass for nearly a decade now. I can't thank you enough. Just TODAY because of your videos i saved over $1, 000 doing my brakes and inner tie rod end myself. I hope you make bank on these videos because they are incredibly valuable.

What you got right is not compromsing on a good shot of what needs to be done. Everything is visible and each step is clear. Im so grateful for what you do.

[kingjames]

I'm 50 years old with four vehicles and I can honestly say you've given me the drive and vision to want to be a small time mechanic for me and my friends. Thank you.

[solutionrecruiter]

that was some of the best step by step camera work with analysis ive seen for an automotive repair video...good work

[nickeon]

7 year old video.. And Chris is still responding to the fresh comments. Legendary

[throwingpearls]

Chris is super thorough; he assumes you know nothing and covers every detail. Excellent video!

[Socks]

Amazing how you gained all this confidence within these past years. You deserve every subscriber man

[charlesxavier]

I love how these videos boost up my confidence. Then you go to actually do it, and every approach requires different steps.

The inner tie rod spins, so I ended up using a pipe and vice scripts to hold it in place. Then there was a rubber housing over the inner tie rod.

The rubber mallet for the castle nut didn't work. Sledge hammer baby. Gotta go caveman sometimes.

[chexmixkitty]

This video combined with your brake and rotor videos, you've saved me an easy 1-2k my dude. Mechanics around here are crazy expensive.

[spookytoon]

Old Chrisfix: hey guys chrisfix here😪.... New chrisfix: HEY GUYS CHRISFIX HERE😃

[carsandchrome]

I'm a long time mechanic and I must say that this video is right up there with the best! You're well spoken, explanations are great, camerawork is great and you know the terminology for what you're working with. Great job and thank you!

[dionwolfinbarger]

Whenever I have car work to do, I try to look for your videos. I know I can trust what you are telling us. Your videos are SOOO helpful. Thanks a million!!!

[ej_genesis]

I know this video may be very old, but I just want you to know how special you truly are man like I mean it to the bottom of my heart you help me, fix my whole inner and outer tire rod in like two hours, bought rental tools, and everything. Chris definitely help me over the years to fix my vehicles you are a truly awesome person man thx so much.🙌🏾🥲
Hope to meet you one day brother .

[JimmyHernandez]

Dude. Your videos rock. No fluff. Straight to the point. Good steady camera. Audio volume and speech speed are just right. You've saved me a crapload of money and taught me a lot in the process. Kudos to you sir!

[chrisfix]

I just updated the video with some edits. Thanks everyone for the comments and suggestions! Give the video a thumbs up if you thought it was helpful!

[godsbadside]

Changed nearly my whole suspension (inner and outer tie rod ends, upper and lower control arms and sway bar end links) all thanks to this fantastic man! Thanks chris!

[MNation]

I've only seen a few of your videos at this point but already the quality and clarity is head and shoulders above the rest. Not to mention how much I appreciate the density of useful information, no fluff. Thank you!

[bepps]

I've replaced at least a dozen tie-rod ends. I've NEVER had one that would come out with a rubber mallet.
I've always used a mini sledge hammer, and hit the spindle from the side. Usually 3 good wacks will pop it out. Also, instead of counting turns, I pull the inner and outer off intact and measure the distance from grease fitting to fitting. Then make sure the newly assembled unit is the same.

[ramonruelas]

13:25 “Now go get your car aligned” is the meanest quote I have heard Chris 😂😂

[shannonmurany]

Chris you are a very generous man! I'm a 51 yo female that has now done almost all of my own repairs on both my 02 Ford f350 & my 07 Toyota FJ because of your videos. Thank you for helping this old gal save money & find enjoyment in getting greasy!!

[jsfeltis]

Chris, that was simply excellent! Thanks for increasing my confidence in replacing my outer tie rod ends!