LIQUI MOLY Pro-Line Throttle Valve Cleaner (#5111) EN

preview_player
Показать описание
LIQUI MOLY Pro-Line Throttle Valve Cleaner (#5111)
Special active solvent for cleaning typical dirt and deposits in the intake and throttle valve area. Loosens and removes all dirty deposits and dirt such as oil, resin, glue, etc. It guarantees the functional performance of the moving parts and reduces fuel consumption. Increases the reliability of petrol-powered engines.

Intended use:
For the intake and throttle valve area including nozzles and holes. Suitable only fur use in internal combustion engines!

About LIQUI MOLY
With around 4,000 items, LIQUI MOLY offers a global, uniquely broad range of automotive chemicals: Motor oils and additives, greases and pastes, sprays and car care, glues and sealants. Founded in 1957, LIQUI MOLY develops and produces exclusively in Germany. There it is repeatedly voted the best oil brand. The company sells its products in more than 150 countries.
Рекомендации по теме
Комментарии
Автор

Its works . I know I did it once . Plus I used it in my gas tank . 2016 Kia Soul . Runs smooth and back up to 35 MPG .

terrymax
Автор

does throttle body cleaner do the same & clean valves?

don.timeless
Автор

2000model golf4'e bugün uyguladım. Sadece gaz kelebeğin onundeki boruyu çıkardım. Stop halinde uyguladım. 2 dakika sonra çalıştırdım ve gaz pedalına basıldıkça uygulmaya devam ettim. Sonuç mükemmel. Rölanti duzeldi

mustafaaltun
Автор

can i use this product to clean aud ia4 3.0 tdi EGR VALVLE/EGR COOLER - if yes how to aply, i have only problem with egr cooler. is clogged. thanks

mrsbrownsboysofficial
Автор

does the engine have to be cold or warm for using this product at best?
in many other videos and on your product is write to spray it first with engine off..then with engine on raving at 2500rpm, in this video you say to turn the engine on before spraying. what's the right procedure?

antoniogallo
Автор

Every time i spray the, engine stops working and the rpm goes to 0, even when the mass air flow sensor is plugged or unplugged

majidjilan-ll
Автор

I understand that any sensor should be removed from air line before flowing the cleaner inside as it may damage the sensors

tomashki
Автор

Hi I'm intersted in this product but some videos or pictures of before and after results would be nice...

bertrandls
Автор

When I apply the product directly to the throttle valve, rpm is down to 1000, and then lower, and the car stalls, any suggestions?

malazemable
Автор

After I used it on my 2012 ford focus 1.6L it started idling very very poorly, it seems like some of the material got stuck somewhere in the intake manifold or in the vaccum hoses, do you have any idea what can I do about it? See I actually got the spray hose inside the intake manifold too after the throttle and sprayed. It burnt most of it when I started the engine but after that it started idling very rough. I guess I did something wrong. Do you have any idea what actually causes that problem?

einark
Автор

Just ran this product through my FG XR6 ute, hope it works because my intake was pretty gunked up lol Are you meant to use the whole can in one hit? Edit: Sorry, it was the combo valve, intake, throttle cleaner i used I think

snowpirate
Автор

Doubt, where does all this carbon go. Will the carbon gets deposited in catalytic converter or in the oil ...do we need to change oil and clean the cats after this. I got a 2014 RS camaro And driven 108k km. Need to make the engine efficient....and how about the rubber seals inside engine will the spray can effect it's deterioration...

sapien
Автор

Hallo kann mann auch bei 2.0 TFSI Motoren verwendet?

vincipalmese
Автор

Hi,
I want to try the throttle cleaner on my 2016 Volkswagen Polo tsi, because I’ve put a lot of mileage on it and have notice the economy and power is not what it used to be. Is this product safe to use on this vehicle, will it not have a negative impact on the turbo for example.

Clearly on this will be appreciated. Thank you

KoritsuRonin
Автор

Mu car has map sensor after the throttle valve. I think i shouldn't use 5111, do i?

dincdincer
Автор

Hi Liqui moly family, I'm wondering if this product is effective if I use it for GDI engine through the intake vacuum, for fixing the valves carbon build up problem.

محمدالبلوشي-حق
Автор

Hi, after this tratment, should i change the engine oil?

marijan
Автор

Hello.
I have a 2010 Toyota Auris 1.8HSD (it's hybrid). It has been using 5w30 engine oil for over 150000km (at 221000 at this point). On the LiquiMoly it recommends to use TopTec4200 5w30 engine oil, however this oil has no Toyota certifications. TopTec 4300 5w30 has Toyota certifications, however is not recommended in the oil guide on the website. Wich one of these oils should I use in my Toyota? For the same car, but with the D4D engine it recommends TopTec 4300 and TopTec 4200. In 5w30, of course.
Thank you.

NotME
Автор

Could you please share the words in the video as text. In this way, we will have a better chance of translating and understanding the fast meaning in the video beforehand. Thank you.

hashimusing
Автор

Liqui Moly Coolant Ready Mix (cooling fluid) RAF12 Plus
for 1 liter Concentrated mix with 3 liter water or what please answer im from Saudi Arabia.

ahmadmousa