hydro power generator

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

That's a lot of wear and tear for 32 watts.

Andy-dffj
Автор

For a hydro generator to be efficient, the end state of the water must have little energy, either potential (elevation) or kinetic (speed). It is clear that the water coming 'out of' the turbine still has a HUGE amount of kinetic energy. Clearly this setup is only harvesting a small fraction of what is available.

Hamilcar_Stronginthearm
Автор

I have a water wheel on my land under a waterfall. Its a 32 foot diameter wheel, only turns at about 6rpm but it provides enough energy for my entire off grid cabin. When the batteries are charged a little switch kicks the belt over to clutch and the wheel just spins freely, when power gets to 25% it engages. Belt connections make sure if anyrhing breakes or goes too fast that the sacrifical piece us just a belt that can be fixed or have a replacement thrown on of which i have 6.

BigPanda
Автор

Идея "хорошая"!
Главное найти неохраняемый участок водопровода и сделать дыру в трубе 😊
П. С. Продам дрель.

wcfvlul
Автор

Осталось найти энергию для "Karcher", который крутит эту турбину, и можно идти за Нобелевской премией.

MihailSvetlov
Автор

Too much speed it's going to kill those bearings in no time!
Low rpm turbines are better!

AutodidactEngineer
Автор

I wonder how much power that jet washer they're using is consuming. 🤣🤣🤣

paultaylor
Автор

The way its running shows that there is almost no resistance meaning that the alternator is too small. There should be a balance between the resistance and waters ability to turn the wheel to get most out of it, try multiple alternators...

moopro
Автор

Existe sistemas desse tipo em prédios altos onde a pressão da água que desce das caixas d'agua gira uma turbina (motor elétrico) assim direcionando a energia gerada para uma bateria e assim ultilizando em espaços de área comum do condomínio. Há reportagens brasileiras sobre isso.

marcelocerqueiramatos
Автор

2200 watts to make the pressure to spin a bit of junk to show 32 watts ?

mrgoodman
Автор

All r gangsta till 500w pump is pressurizing the water.

sahilsalvi
Автор

32 watts is nothing with that pressure better use a pelton turbine with 1.5 kw 1400 rpm generator

GbFancyBirds
Автор

Not very efficient... You could easily double your power output

johno
Автор

Great news!
I figured out how to reduce my power cost.
The only problem is that's exactly how much my water bill increased.

IamME-hw
Автор

Awesome. Now you can turn on one lightbulb.

zacksrandomprojects
Автор

you can totally fit a second wheel that runs off of the water output from this wheel ... this looks awesome

shiddy.
Автор

Working on a portable one right now. Funny this came up on my feed.
But. Getting time to try alternatives out.
Everything's out of control right now

mi.dogman
Автор

My homie is capturing 0.1% of that energy

fostersstubbyasmr
Автор

Нихренасе се напор, это из трубы центрального водоснабжения?))

bublik
Автор

id suggest checking the alignment, the barrings, and the housing maybe upgraded with heavier grade matterials (basic idea is get the wiggle out of the system), and use a "U" shape as the target for the water to cling against as it passes by, just add a catch shield to change the splash/spray that comes off of it at the end, looks awesome 🎉✌

KJ-xtyu