Dust Right 750 CFM Mobile Dust Collector - Tool Overview

The Dust Right® Mobile Dust Collector rides on smooth-rolling casters to service all the power tools in most small shops. It features a large wire basket in the base for neatly storing your hose and nozzles, and mounting holes in the frame let you hang various Dust Right® accessories. This way, as you roll it around your shop, you'll always have the accessories you need close at hand. The dust collector comes standard with a high-quality 1-micron canister filter, which further contributes toward cleaner air in the shop. The crank-style agitator makes it easy to clean the filter—just rotate a few times to knock the dust off the sides. Plus, emptying the collector bag couldn't be easier, thanks to the convenient snap band ring. 750 CFM promises excellent suction for most any power tool.

[fosteredwoodworks]

Wow, that'd be a great addition to any shop. I really need to upgrade my DC in my garage and this is now high on the list.

[jonlanier_]

Nice, yet one serious flaw. You need to up on 3-4" wheels. In a real shop, that puppy is going to get snagged up by small debris, cords.... you get the idea. I have Dust Collect that I stripped off those tiny wheels and replaced them. So much better... and I can take it outside and it will roll on the drive way... where much debris can show up.

[BAILEYWOODWORKS]

I like the paddle filter-cleaner! I dont have to hit the filter against the trash can!

[davidcrandell]

I wish they were available in my neck of the woods. that's really impressive

[GregsWorkshopOregon]

There don't seem to be a lot of independent reviews on this item. You should send me one and I'll make a video about it.

[takeniteasyfriend]

Absent of cleaning the floor, let's see it in action on a major table saw or a full-sized jointer. Connect it to a Sawstop PCS or a Powermatic Jointer. Then let's see the results.

[Cactustone]

Do Not believe the jointer claim until you witness it, especially from a Powermatic jointer. I have a Powermatic 6" jointer with a helical head cutter and my Jet mobile dust collector does almost nothing to collect dust from it. Even after trying to seal the jointer the performance is practically zero. Highly skeptical.

[Metal_Vistas]

Can this be used in conjunction with a cyclone attachment? I work with Corian and other solid-surface materials, and the particulates are so fine and so dense, they quickly clog filters unless there's a cyclone / second stage to remove most of it. Thanks.

[eballacharles]

All tools from rockler you shipping worldwide?

[billkiessel]

did this just increase in cost by $200??

[georgebrill]

A piece of junk. The hose won''t fit, the screw holes are too small and etc. Save your money

[leonardmartin]

This thing is terrible. Taking it back!!!