Vendor video: Alphacool Eiskoffer bending tool bag for HardTubes

What is it?
The Eiskoffer Bending Tool is perhaps the most comprehensive tool kit ever created for those looking to outfi t their PC with HardTubes. All the tools, angled pieces, and other products required for bending HardTubes can be found in this case.

1. The complete equipment set for the ambitious HardTube user
2. All bending radii can be mounted on the mounting plate
3. Unique: 3D HardTube bends are possible
4. No other tools required, ever again
5. Sturdy, elegant case for neat tool organisation

[SgtDreTecKeGamer]

As " James Krolak " stated, it would be more helpful if you made a detailed video on how the measuring is transposed from the cooling components in a case to the plate that holds the mandrels, I saw some kind of a booklet, but how detailed is it and seeing that Alphacool made this kit, why not make a video on how to measure and use that measurement to create the bends needed for a cooling set up, even if it's just the CPU loop. Or just a GPU loop. making a bunch of bends that are being put in to a water cooled system is not very helpful.

[jameskrolak]

How about a video where you actually demonstrate how to take measurements in a case and how to translate that to the board and the tools? Monsoon has some great videos on how to do that with their bending kits. I bought theirs and followed the videos and it worked great. Your kit has way more components, but every video of it looks like someone is just screwing around and trying to create the goofiest bends that they can. That's not helpful for the actual builder that would be using this.

[HawkFest]

Thank you! It would have been better to demonstrate the usage in an actual build, to see how this kit can facilitate custom loop design/building, especially in regard to measurements, angles etc INSIDE THE CASING, rather than just show that we can bend tubes using the guides. I'm asking because my main problem is not about how to use a heat gun to bend a tube along some guide (which is common among all competing kits on the market: they ALL do this), but rather *how to use those rulers and angle measurement tools that are provided, and translate those precise measurements onto the kit's bench, up to the final build.*

Note: I know That this clip is old. But since it's the one that's linked from Alphacool's Website, _today_ as I'm shopping around to buy it, then the publication date is irrelevant.

[orkistlnaabecker]

100% richtig der andere hatt nie infos gegeben hatt mich immer aufgeregt top 🖒🖒🖒🖒

[lyricallysikh]

I'm a little confused, the manual for this kit states on page 52 in English, "All bending mandrels and stoppers are de-signed for tube diameters of 12 or 13 mm and 16 mm" (I'm assuming it's talking about the hardtube outer diameter) but the product is advertised for 13 mm and 16mm hard tubing? Can you actual use this kit for PETG tubing 12 mm OD, 10 MM ID?

I'm interested in this bending kit, I'm no expert but I wish there was a detailed video on how to take measurements from the inside of my PC case to the bending plate. For ex. how to measure from my CPU block which is located on the side wall of my PC case to the radiator fitting which is located on the inside top part of the case and take the measurement of those two items where both measurements are not parallel to each other? The manual doesn't really offer much detailed explanation on how to measure. It basically just says, measure one fitting to the other fittings but doesn't really show you how in detail. Again "Alphacool" please make a detailed video of different scenarios on how to measure 3 dimensional objects and take the measurements onto the 2 dimensional bending plate and bend the tubing to exact fit!

[ThinkLegal]

Can this bending kit be used with 14 mm OD tubing?

[MihaiDobrin]

what about 14mm tubes should i use the 13mm side or 16mm one?

[hokiturmix]

This video actually makes no sense. A "kid" bending tubes with apearantly no practical use. Just for the sake of bending.