reset 2011 Toyota Prius Oil Maintenance Required Light

This video will show you how to reset your 2010, 2011, 2012, 2013, 2014, 2015 Toyota Prius oil maintenance required light after an oil change Maintain REQD oil service light service reset light. 1-make sure the odometer is Reading as ODOMETER. 2-Turn the car off. 3-press and hold the ODOMETER button and push the power button to put the car in Ready mode, While still holding the ODOMETER button. 4-The odometer will display dashes_________ and will count down and then display the normal odometer reading. 5. Release the ODOMETER button. 6. And that's it all done the Maintain Required light is now reset for another 2500 miles or 5000 miles based on the oil used

[johnforrestboone]

I come back to this vid every 5k miles. Thanks

[icnmtt]

One of the guys from service was redirecting me to electric master, which said that he couldn't understand how to turn that off. Thank you, Pirus man, who made it easier!

[Elvergalargax]

2 dislikes wtf people, it's very good video perfect indication for all off us

[uzomarose]

the best video, straight to the point, easy to remember. thank you

[TheRitchieLeeShow]

⭐️⭐️⭐️⭐️⭐️ 1:16 straight to the point.

[nickg.]

Thank you sir! I'll see again in a couple months! Straight to the point great video!

[tonyaluvsdancensing]

this was much simplier and quicker than what the maintenance man showed me at Toyota and something I can remember without having to keep going back over and over THANKS 4 POSTING

[LaDonna-nldm]

Thank you!! So much I started to feel like the they didn’t change my oil . Lol

[FerdinandThaBull]

simple and to the point. thank you sir.

[CC-gefo]

Thanking you from quarantine!
Stay safe and mask up!

[dziegele]

Great video! However, I first tried using the written instructions, which are incorrect and don't match the video. A couple of edits will fix them. The video says to make sure the miles show "Trip A." The text says it should read "ODOMETER." The video says to press and hold the "kmh/MPH button." The text says to press and hold the "ODOMETER button, " (which I assumed meant the "Trip" button). I suggest that you either fix the written instructions or delete them. In any case, when I followed the video instructions, everything was perfect! Thanks for doing the vid.

[thebestsport]

Beautiful man👏. I get my check hybrid system without the check engine light and my READY light stays on. I suspect my 12v battery, since my high voltage battery is from 2021.

[lifegods]

I'm glad I found this video, thank you!

[sun]

Thank you for the information…. Much appreciated

[Jewel_xo]

Great instructions! Now.... if only I could figure out the hybrid system light 😔 I’ve already had the dealership “fix it” before

[Lovelypilgrims]

Do you know how to do this without the steering wheel buttons? They do not work anymore for me..

[slem]

Thank you so much! I really appreciate you

[cfjpm]

What do I do when the ABS light (the yellow triangle with exclamation pint) lights up. Also a message that says Check Hybrid System. I removed the fuse for the ABS and put it back in. Could that be the problem and just needs to be reset? If so, how do I do that? If not what could be the problem? How do I fix it? I would appreciate any help. Thanks.

[wise_soul]

*is there any other way if the trip button doesn't work?*

[briancole]

I wonder why they made it confusing? without watching this I wouldn't of known. resetting the engine oil maintenance under settings did nothing so thanks