IP2312 Quick Fast Charging Board. USB C Charging, Lithium Battery Charging Board Full Review

18650 battery or li-ion batteries are commonly used to provide power for electronic projects. Many people use tp4056 modules to charge only one cell or two cells in parallel while different charging modules are used to provide constant current and constant voltage required to charge li-ion cells. But when using the tp4056 module, it has to be limited to a maximum charging current limit of 1A. If fast charging requires a 3A charging current, you can use charging modules that use the ip2312 ic. So today we will talk about the ip2312 charging module which can provide the charging current of 3A in this video. Let's get started !

• Name: 3A polymer ternary lithium battery fast charging board
• Main control chip: ip2312
• Input voltage: 4.5 ~ 5.5V
• Charging cut-off voltage: 4.2v
• Charging current: 3A
• Indicator light: Yes,
• Red: work indicator light.
• Blue: full indicator.
• Note: This product does not have the function of electricity indicator and battery protection.
• Conversion efficiency: 3A 93%, 2A 94%, 1A 95%
• 3A by default, remove resistance 2a and replace it with 135k resistance 1A

-- Data Sheets which were shown during the video --

IP2312 Datasheet -

-------MORE VIDEOS-------
SZBK07 300W 20A Buck converter

How to make Power Backup UPS For Router and Modem

Wireless Charger Transmitter And Receiver Modules.

PWM solar charge controller

How to modify TP4056 module

ECC Easy Chip Charge Module

Tp4056 Li-ion battery charging module

How to use CKCS BS01 Mini DC-DC Step Up Module

How BMS modules are Working

How to make Power Backup UPS For Router and Modem

How to use XL-6009 Buck Boost convertor

[NyneIX]

I know nothing about electronics, but i bought one of these anyway. This is the best video on YouTube about the IP2312. Great job! 👍

[tech]

සෑහෙන්න දවසකට පස්සෙ නේද.සුපිරිම වැඩක් සහෝදරයා

[keith_ferdinanduz]

As always, Good explanation! 👍
Keep it up brother 🤜🤛

[holysailor]

Always good to see you. Excellent video

[miteshdhanani]

As shown, if we want to connect this 4.2v battery with 6v 3A 3W solar panel then

[drickph]

I have 3s battery with BMS I can just add this right

[jugaad]

can it used for safe discharging through input

[arielelijah]

I use heat sinks on this module and it provides 3.27 Amperes that's more than 3 Amperes.

[mediatrix]

Hi. Can I use an old Nokia charger that is 5.7v output and about 300 to 800 mA? Will it still give me 2 to 3 amp charging current? Will it increase the current, or must I have to use a charger with higher amps? Plz help. Thks.

[malruwangallage]

ඒ 1s bms එකේ charging discharging protection 2ම තියෙනවාද

[shavindu_gayashan]

32650 lifepo4 battery 1 k charge karaganna puluwan module ekak nedda? 32650 battery eke full charge voltage eka 3.6V hinda tp4056 module eken charge karana eka honda nee neda?

[wnpprasad]

tp4056 එක වගේ මේකේ output ගන්න වෙනම පාස්සන්න නැද්ද ?

[kasunperera]

Battry protection tiyena 3A ganna puluwan module ekak නැද්ද ?

[EliMesh]

Hi Bro' App Kahan se? Request Video IP5328P

[minminhtet]

I connected wrong + - how can i recover that :(

[oleganonimka]

The title of this video contains false information. In fact, a current of 3A will be at the output of such a board, and not at its input ... That is, it will charge the battery at 4.2V with a maximum electric power of 12.6W.

[lancereyesromero]

next time, when you create a non english video, dont put english title. 👎👎👎