HOW TO INSTALL TESLA WALL CHARGER GEN 3 Wall Connector

I will show you how to install your Tesla Wall Connector charger. It is the most convenient charging solution for houses, apartments, hospitality properties and workplaces.

#tesla #how #howto #diy #amazon
#ad USA: Gen 2

CANADA: Gen 2
Gen 3

*WIRE*
200ft cut and less

Cable Clamp 1"

1" PVC Strap

90° Elbow PVC

Features:
Up to 71 km of range added per hour at 11.5 kW / 48 amp output
Auto-sensing handle to open charge port
Monitor and manage your charging schedule and usage from the Tesla app
Wi-Fi connectivity for over-the-air updates, remote diagnostics and access controls
Versatile indoor / outdoor design
Minimize install costs and maximize charging speed using Power Management features
7.3 meter cable length

*Want to EARN FREE money* while shopping online? Over 3500 stores.
SIGNUP BONUS when you use my link. Join NOW and receive $30 when you spend at least $30 before taxes! Must be done within 90 days of signup.
SIGNUP BONUS when you use my link. Join NOW and receive $30 when you spend at least $30 before taxes! Must be done within 90 days of signup.
FOR USA receive $30USD

FOR CANADA receive $30CAD

*Try Amazon Prime 30-Day Free Trial*
*Give the gift of Amazon Prime membership*

*Donation to support my channel running:*

*DON'T forget to LIKE this video and SUBSCRIBE to my channel!*

[KevinPon.]

#ad USA: Gen 2

CANADA: Gen 2
Gen 3

*WIRE*
200ft cut and less

[Drunk_in_a_foreign_land]

May I know if I can use 3/4-inch PVC pipe? In this way, there is no need to expand the bottom inlet of Tesla connector.
In addition, due to concerns about heat dissipation, would metal pipes be more ideal than PVC? Thanks!

[jlewis]

I have to come though the basement wall into the garage in a similar manner. Except once I come into the garage I need to make a 90 and go up the wall about 2 ft. If I Use 6/2 MC cable, when I come through the wall, can I just bend it upwards and into the base of the charger, or would I also need to run through a box? Would I need to stop the MC there and run a solid conduit the last 2 feet? Just not sure the best way to finish it up.

[jialedai]

Hi! Which wire are you using in the video? 6 AWG wires?

[Drunk_in_a_foreign_land]

One more question. If only use 40A to charge Tesla, in this case, the electrician suggested using a 50A breaker other than 60A. His explanation is that the current and temperature are proportional when charging, and the temperature of the 50A breaker when it trips is lower than that of the 60A，He thinks 50A is safer for 40A (50A*0.8) charging. My panel is 150A, any suggestions? Thanks!

[neilmartinez]

Thanks. Mine is getting 48A already with 50A breaker and 6awg wiring. Thoughts?

[Drucio]

Whats the purpose of the box? So my panel is in the basement but can run it going straight up and out to the side of the house and that same wall down 20 ft is the garage where im putting the charger inside. The corners going into the house do i put a box?

[tifo-prux]

Congrats on your fine install. I'm using it as my guide. I can't find a source for that optional bushing and you didn't include one in your parts list.

[Lucky...]

Hi, i like your video . If i have the tesla motel 3 base, is only take 32amp maximum. Is still ok to do the same like you 60 breaker and wire size #6 or is there any problem? Or i have to do with 40 breaker and wire size #8 ? Thank you !

[Drunk_in_a_foreign_land]

This is the cleanest job I have ever seen done by a DIYer. I have a question, I saw some installers run the wires inside the drywall. After installation, there was only the charger outside, and there was no PVC tube underneath. Is it because the wiring needs to pass through the insulation inside the drywall, which increases the difficulty? Or are you worried that the inspection will not be passed? Thanks!

[giantinside]

Does anyone use a torque driver when installing the Gen 3 Tesla wall connector?

[LOVEABRAHAM]

What size wire did you use, and breaker did you use?

[Mangopq]

I just installed Tesla wall charger, gen3, and i was able to cjarge my model 3 with 48A, but then, like 15 mins later, my circuit breaker went down, and charging stopped. I turned it on, and it charged again with 48A, but then i lowered it 32A because i just looked at the circuit breaker, and it says 40A.
Now i have no idea what to do. Please give some advice to me to be able to charge mine with 48A

[richardhuck]

The wire per code needs to be #6 THHN for a 60 amp 90 deg c continuous load

[ducatiist]

6/3 Romex is only rated for 55 amps and you’re using a 60 amp breaker.

[NickWindham]

Where are all the ranting electricians??

Good job man!

[paulibarra]

Nice. But I don't like EV it's danger. To expensive and at the end garbage stuff.
But it's nice stuff