How to start Ryobi Petrol Line Trimmer - RLT26C

Step by step guide on how to start your Ryobi RLT26C petrol line trimmer

[francescapoching]

Why is starting this weed eater such a workout. I’m trying to do this without my neighbours hearing me thinking I can’t start my own weed eater 😂

[nodrama]

Takes me about 40 times before it starts

[JaydenLawson]

I saw on another video that you will damage your motor's cylinder if you're giving it full throttle when its cold. They recommend letting it idle for about 60 seconds. It's because the piston expands faster than the cylinder, due to heat, which then rubs against the cylinder and eventually irreparably damages it, and you lose motor compression. After idling for 60 seconds, both the piston and the cylinder have expanded at the same rate and no damage will occur.

[chrisk]

Always used this method, works just fine. If you attempt to start it any other way, it will seem as if the unit is faulty or not working.

[neildeakin]

Is this a cold start? If so, why does the diagram on the LT2 say 4 pulls on full choke then six pulls on part choke?

[dr.lexwinter]

*CONSUMER WARNING:* No one has ever, ever started it that fast. If you're lucky you'll start it after 30 minutes of yanking if your shoulder doesn't give out. There is no excuse for low quality crappy Chinese engines anymore. Get something from England, Germany, or America - avoid Ryobi until they do too. It shouldn't need ten primes and 4 yanks to get the fluid through it, there's something deeply wrong with this current engine. It also NEVER comes off choke in ten seconds, you'll probably have the choke part on the entire time - IF you actually get it to start.

[foodonly]

Really I hv been trying with this video nothing working

[guerradan]

Can you please answer this question for me. What is the best way to store the ryobi weed wacker when you want to hang on the wall? Thanks

[gillypoof]

yes and good luck with that, new spark plug spluttered for a nano second then nothing ever its a piece of junk

[Ramh]

Fuel lid is keep leaking when I hold it in the trim position. I changed the new lid still fuel is coming out from the lid. Can anyone help?

[chris-cck]

when i turn it to green but then as soon as i press the lever to trim it cuts out i dont know why?

[michellechristy]

Where an i buy a carburetor of this ryobi grass cutter pls. Thanks so much for anyone who can help.me.find this. I really need my ryobi to be fix . Thank you

[typer]

Worse idea buying this whipper snipper. Its a piece of shyte