LiFePO4 BMS, What is a BMS Why You Need One. Lithium Ion.

preview_player
Показать описание
My website (still under construction)

******Parts******

LifePO4 Battery 12v (AliExpress)

LifePO4 BMS (AliExpress)

Inline Shunt (AliExpress)

Battery Capacity Tester (AliExpress)

12v 1kw MPPT Solar Inverter (AliExpress)

24v 2.4kw MPPT MPPT Solar Inverter (AliExpress)
Рекомендации по теме
Комментарии
Автор

I live full time in my van and need a reliable power supply. Its ironic that the BMS is the one thing that's stopping me switching from AGM to Lithium. I know many people who have lost total power because the BMS has sensed some kind of problem. No warning, no understanding what's happened, just total loss of power. The BMS should send a warning before it just shuts down. Having the risk of a total power failure in my van is not an option.

mange
Автор

Is there a specific BMS for each type of battery or will all BMS’ work with any battery?

pissedoffpuppy
Автор

My DALY BMS 15v 100A Just Flamed Up and Burnt all the Red Wires !

marktheunitedstatescitezen
Автор

Hi gentlemen...I have 105ah I can uesd 100 bms ? Please if can help me...thank you

yousefjubran
Автор

Have you ever tested the overvoltage cut off threshold of the bms while charging with an mppt CC?
....after being disconnected from the battery by the bms i guess it will ride at the pv ocv...will this high ocv damage the bms at reconnect point??

AlexTorres-qvhv
Автор

witch one should i buy for Sonar ( fishing ) I need minimum 28AH LifePO4 Battery ( 5x 3.2v ) i need the smallest possible setup. The sonar use 1ah of energy.

benoitarteau
Автор

I think I shorted out my bms by disconnecting the balance wires before unplugging it. The voltage now reads 9.5 v with bms connected. Is the bms reparable?

mikeklungland
Автор

I wanna upgrade to these. 16 cells 24 volts. How many BMS would I need? And how to monitor every single cell like you have? And bms connects to charger and inverter same point?

jregamey
Автор

hi chris. great channel. I want to buy 4 x 200Ah cells and set them to 14 volts. how many amps should the BMS have? should i buy the 250Ah version?

fritz_the_superkraut
Автор

You state they should never be charged higher than 3.6v per cell, but I thought they were rated at max 3.65v charge rate per cell? Is that not true?

ttttenney
Автор

Can I use 48v bmw for 24v battery and just leave the rest of wires?

marcass
Автор

How do you choose the correct BMS amp rating for the battery you intend to build? Is the rating based on how many amps you expect to draw as a maximum or is it determined by the constant and/or maximum current discharge rate of the cells?

HighlineGuitars
Автор

Hi
I need your opinion.
I have the same volt and ah bms but it is not written lifepo4 on it.
Nevertheless i tried to use it and if I measure the lifepo4 cells have without bms 12 volts...but if i measure with bms the value shown is 8.6 volt...
Bms is damaged?
Thanks in advance!

Darkgrin
Автор

How do l know if l need a 100A BMS or a 200A one…..l am new and do not understand

kayperkayful
Автор

How do you correctly size a BMS to your things you want to run?

Veveve
Автор

I have that exact same BMS. Would you know how to reset it? My cells are all reading between 3.31 to 3.33 volts but the BMS itself is only putting out 3.3 volts and won’t accept a charge from my SCC.

guyfromboracay
Автор

Is this lifepo4 bms compatible with lithiun or li-ion batterys?

elgringodelasscooters
Автор

Do I need a bms on every battery in my system?

sasquatchhuntin
Автор

hi, i have the same bms. but when we put the solar and start charging it, we hear the bms producing low humming sound. is it normal? thanks

anythinggoesme