HOW TO CUT WALL TRIM? 4KW 220V Electric Wall Cutter- Buy at Banggood

Показать описание

==========================================================
Safety Instructions:
1. Working environment:
(1) The work area should be kept clean, well lit and well ventilated.
(2) Do not use the machine in places with inflammable or explosive materials.
(3) When working with the machine, be sure to stay away from children, bystanders and animals.
2. Electrical safety:
(1) This machine uses leakage protection plug. Please read the warning label on the plug before using.
(2) The socket type of the link power supply should be matched with the plug provided by the machine. It is not allowed to make any modification to the plug structure, and the machine is used under the condition of a grounding wire please.
(3) Do not use the machine outdoors on rainy days. Avoid contact with heat, oil, sharp materials and moving parts.
(4) Do not use the power cord to pull the machine, so as not to cause the machine to contact poorly and not work properly.
(5) When the machine is used outdoors, please use the outdoor extension 2mm3 power cord and keep the link secure.
3. The use and precautions of this machine:
(1) When operating this machine, always be vigilant. Before starting the machine, you should also check if the adjustment lock wrench and tool are off the machine.
(2) Please use protective equipment, such as dust masks, goggles, ear protectors, etc., to prevent splashing sand and dust from damaging the eyes and face, or hearing damage due to strong noise.
(3) Avoid accidental starting. Before turning on the power cord, please make sure that the switch of the machine is off. After confirming, then turn on the power. Do not put your finger on the button of the switch immediately to prevent accidents.
(4) Please do not wear loose clothing, do not wear jewelry, users with long hair should put their hair into the protective cap to avoid touching the moving parts during operation, causing accidents.
(5) Please carefully check the cutting piece for cracks or damage before operation. Please replace the cracked and damaged cutting piece immediately.
(6) Before cutting, you must wait until the cutting piece reaches full speed before you can start working. Keep straight and smooth at the time of grooving, push forward at a constant speed.
(7) Operators should wear insulated gloves and insulated shoes when using water cutting operations, so as to avoid accidents.
(8) When the machine is working on the slotting and cutting of the corner, it is necessary to open the shield, pay special attention to the protection of the flying sand. Do not operate with the fixed guard removed.
(9) After the cutting is completed, you must wait until you stop the rotation completely before you can lower the machine. If you feel any strange, stop working immediately.
===========================================================

Subscribe to Banggood Online Shop Channel!