ESP32-S3, 4.3inch display, touch lcd, 800×480 resolution, 65K color, supports wifi & bluetooth

preview_player
Показать описание
ESP32-S3-Touch-LCD-4.3B is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  1. Waveshare Electronics
  2. Waveshare
  3. esp
  4. touch lcd
  5. display
  6. monitor
Рекомендации по теме
ESP32-S3, 4.3inch display, 0:01:17

ESP32-S3, 4.3inch display, touch lcd, 800×480 resolution, 65K color, supports wifi & bluetooth

LVGL Demo on 0:01:55

LVGL Demo on ESP32-S3 4.3' TFT & ESP32 2.8' TFT

#New 4.3' ESP32-S3 0:02:32

#New 4.3' ESP32-S3 TFT Touch, LVGL/ Indoor Environment Monitor(TVOC/CO2) /...

Elecrow ESP32-S3 4.3' 0:01:33

Elecrow ESP32-S3 4.3' HMI TFT Touch Screen Compatible with Arduino/LVGL

4.3 inch touch 0:00:46

4.3 inch touch screen 480X272 Resolution esp32 lcd board with esp32-s3 module #esp32 #touchscreen

ESP32-S3 TFT Display 0:01:24

ESP32-S3 TFT Display 3.5'' ILI9488: SPI Version vs Parallel Version

Introduction 4 3 0:14:35

Introduction 4 3 Inch ESP32 LCD Touch Screen

3.5' TFT Color 0:08:06

3.5' TFT Color TOUCH Display-DRIVER ILI9488 for NodeMcu ESP32

4.3 inch Touch 0:00:46

4.3 inch Touch Panel LCD display esp32 lcd board 480*272 Resolution RGB Interface with esp32-s3

Waveshare 3.4inch DSI 0:00:58

Waveshare 3.4inch DSI Round Touch Display, 800×800, IPS, 10-Point Touch, for Raspberry Pi 4B/3B+...

ESP32-S3 Touch LCD 0:00:57

ESP32-S3 Touch LCD 4.3 inch (TTSP)#Shorts

Exotic Round Displays 0:14:21

Exotic Round Displays and How to Use Them

Getting Started with 0:51:05

Getting Started with the 4.3-inch Capacitive-touch ESP32 Sunton Display

Very small TFT 0:00:16

Very small TFT Display

ESP32-S3 Touch LCD 0:00:57

ESP32-S3 Touch LCD 4.3 inch (TTSP)#Shorts

All Makerfabs MaTouch 0:01:55

All Makerfabs MaTouch Support LVGL - ESP32 Touch Display | SquareLine Demo

ESP 32 TFT 0:00:11

ESP 32 TFT LCD Sheiled 320x240 Animation

LVGL Touch Screen 0:01:57

LVGL Touch Screen Demo | Elecrow ESP32 TFT Display 2.8' VS 4.3'

5.0 Inch ESP32 0:03:48

5.0 Inch ESP32 Display Module 16M Flash Ips Tft Lcd Display Module ESP32-S3

clock on ESP32-S3 0:01:52

clock on ESP32-S3 4.3' TFT display + touch adjust time (2)

Round LCD Display，Rotary 0:00:19

Round LCD Display，Rotary Switch，LCD Touch Screen，Round OLED with Knob

Makerfabs ESP32-S3 4.3' 0:01:04

Makerfabs ESP32-S3 4.3' and 4.0' Displays Support LovyanGFX Lib Now!😍😍

clock on ESP32-S3 0:02:46

clock on ESP32-S3 4.3' TFT display + touch adjust time

Waveshare 3.5inch 480x800 0:00:52

Waveshare 3.5inch 480x800 LCD IPS Capacitive Touch Display Adjustable Brightness for Raspberry Pi...

Комментарии
Автор

you need to start teaching people like how to use it, not just demo, especially how to send data serially like other display company, this is a new to us and we need to understand howto use it like how we can use to on led or send data to another micro controller to to control led, servo, analog and so on.

arewatec
Автор

I have this display:
ESP32-S3 4.3inch Touch LCD Development Board Type B, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
I searched a lot until I managed to make it work. Today I updated libraries like lvgl, ... and everything went away. Nothing worked anymore. Errors, errors, ... :((( .

crisselectronicprojects
Автор

I'm using a Waveshare Esp32 7 inch board and developing an interface in Squareline for Arduino IDE and 800x480 resolution, but when I create the UI file the file loads but my display doesn't work, if anyone knows the solution please help me, I'd appreciate it.

luizcesargawlik
Автор

Hello! I ordered this display but the battery I found is Li-Polymer 1200mAh 3.7V JST 1.25. And the dimensions are 50x34x6 (LxWxD). In the display specifications, a battery with dimensions 60x30x6 (LxWxD) and GH 1.25 connector is recommended. Do you think my battery will fit - Li-Polymer 1200mAh 3.7V JST 1.25. And the dimensions are 50x34x6 (LxWxD)-?

crisselectronicprojects
Автор

Não adianta de nada mandar link, já segui o manual e nada de funcionar direito a tela, só funciona com os exemplos, lgbl deveria funcionar bem usando ide Arduino, mas até agora nada funciona, nem plugins para isso a fabricante não disponibiliza, VScode consegui fazer alguma coisa funcionar, mas com muita dificuldade!! Me arrependi da compra 100%

Printer-CR