Trak Racer's bass shaker kit hands-on! Full sim racing setup Part 4

Huge thanks to Trak Racer for letting me test their newest product! In this video I am installing and reviewing the TR bass shaker kit!
It comes with an amplifier (2x 100W outputs), 100W bass shaker and a remote control.

Let me know in the comments below if you have any questions!

00:00 Intro & Update
00:55 Unboxing
02:35 Bass Shaker Installation
04:19 Trak Racer Device Manager Install & Overview
05:56 Putting it to the test in iRacing
08:51 Verdict!
10:28 That's it

Full setup review

TrakRacer Bass Shaker Kit - Affiliate link

TrakRacer TR160S - Affiliate link

#simracing #racingsim #trakracer

[girdsy]

next step is the slip-angle kit for the corners that will add more effects and isolate the vibrations to the rig better

[MurrMaan]

I have been using a bass shaker (BK+) for a couple years and I really love feeling the engine / gears and curbs letting me know I'm using all the track and hitting my apex's. Looks like a cool set up by TR.

[Woopass]

You are right, haptics for sim racing really adds to the immersion. I have one bass shaker on each corner, 4 all up and I think it makes me faster.

[markchurch]

Thanks for awesome video Sarah. Very helpful and well presented.

[lawyerever]

Great review, thank you. I ordered the kit as well as the bracket.

[SolarScorpion]

I like that mount under the seat, I definitely need one of these 🤩

[Lorenzodial]

This is cool glad to see you! Nice driving. I need one

[rarityd]

can you make another video about that amazing looking blue RTX in the background. I too have the FGT aluminum extrusion rig but I much preferred the look of a tubular rigs.

[Roy-uepn]

Sarah each day that passes is a day closer for me to get my dream sim 😉 cant wait 😆

[DeeDee-bemo]

Hi there - I'm wondering how is this unit is holding up for you? I just went through a 2nd sets within 3 months with only about 10 he's. Per week simm racing. Both time my units were functioning as usual and then there was a single pop sound combing with a burnt electronic smell while the house breaker would jump

[ShawnHinck]

Did you get yours to work as a 2 channel system? I have 2 shakers, and it only shakes both with a channel 1 signal, channel 2 does nothing no matter how I hook it up…. Trakracer support said that “oh it’s not actually a 2 channel amp….” So I’m trying to figure out if their advertising is wrong or support is wrong…

[StickyPlasters]

Id like to see a comparison against iRacings built in lfe vs trak racer software. Usually for a single transducer, built in beats anything

[shaungarrard]

great vdo, can anyone show me the wiring thats goes into the sound card

[LWJpro]

3:50 where do you connect the stereo cables?

[ericbaker]

I have 1 additional question on this Sarah. Physically on the Amplifier what do you have the High Cutoff Frequency knob set on example 40 or 50Hz and do you have the High Cutoff or Low Cutoff buttons pushed in? Thanks

[atlanticearthaerials]

Just ordered mine along with that lovely seat bracket. Thanks for the awesome vid. Question, can you confirm how the amplifier is connecting to your PC? Is it via USB or 3.5mm?

[Tony]

HI all. I’m having an issue with my audio setup when using the base shaker kit. The issue I have is that I can’t get both the shaker and my wireless headphones working at the same time. I have the shaker unit setup using the 3.5mm jack lead supplied, which is connected to the audio 3.5mm jack supply on the motherboard. Any setup help would be much appreciated. Thanks in advance. Great channel Sarah 👍

[elisimracing]

Very interesting. My BK has been acting up lately so I might have to try that TR. Btw rigs are never “complete” Sarah. We always find something else to add 😂

[agordon]

I'm more interested in how you got audio signal from PC to your amplifier. Did you use a Y splitter?

[mitzthegamer]

Great video, what triple monitors would you recommend to get ? Is ultra wide better ?