Using DS3231 RTC Module with ESP32 in Arduino IDE | Example code & Library | English Subtitle

Using DS3231 RTC Module with ESP32 in Arduino IDE | Example code & Library | English Subtitle
Code : code is on the comment below.
Please Subscribe my Channel. Thank You!

[doit.]

#include <Wire.h>
#include <RTClib.h>

RTC_DS3231 rtc; // Create an instance of the RTC_DS3231 class

void setup() {
Serial.begin(115200);
Wire.begin();

if (!rtc.begin()) {
Serial.println("Couldn't find RTC");
while (1);
}

// Uncomment the following lines to set the initial date and time if needed
rtc.adjust(DateTime(__DATE__, __TIME__));
}

void loop() {
// Read the current date and time from the DS3231
DateTime now = rtc.now();

// Print the date and time on the same line with two digits for hours, minutes, and seconds
Serial.print("Current Date: ");
Serial.print(now.year(), DEC);
Serial.print("/");
printTwoDigits(now.month());
Serial.print("/");
printTwoDigits(now.day());
Serial.print(" Current Time: ");
printTwoDigits(now.hour());
Serial.print(":");

Serial.print(":");

Serial.println();

delay(1000); // Update every 1 second
}

void printTwoDigits(int number) {
if (number < 10) {
Serial.print("0"); // Print a leading zero for single-digit numbers
}
Serial.print(number);
}

[GraphofSine]

thanks for ur great video, i wanna ask somethin, i use lcd 20x4 to display my rtc, but there's a problem: every 8 second, the second unit being skipped, so when the time is hh:mm:13 and hh:mm: 21, and so on they didn't appear, but when i display it using oled, it works normally, do u know any solution for this?