How to Wire the Oracle Oculus Colorshift Headlights with a BC1 RGB Controller

The Oracle Oculus ColorSHIFT Headlights are designed to be a direct replacement for the 2018+ Jeep Wrangler JL and the 2020+ Jeep Gladiator JT. They feature a plug and play wiring connector for the headlight which utilizes a single LED Projector Lens for both low and high beam function. There is a white LED DRL Halo ring, as well as 3 separate RGB LED zones consisting of the outer ring, inner ring and the demon eye that illuminates the projector lens. Using the BC1 Bluetooth Controller, there are a few options for making the RGB wire connections that will allow you to control how the three RGB zones function. Rob explains 3 different wiring options, the first will sync all three zones to the same color using a single BC1, the second will allow all three zones to display different colors using a single BC1, and the third will require 3 separate BC1 controllers to give you independent control over each RGB zone.

#jeep #wrangler #oracle

00:00 Subscribe to Quadratec
00:22 Oracle Oculus ColorSHIFT Headlight Features
01:30 RGB Demon Eye & Halos
02:09 Oracle BC1 RGB Controller Install & Features
03:59 Wiring the BC1 to the Oculus Headlights
04:20 Wiring option 1 - Single BC1 Controller, all zones synced
05:05 Wiring option 2 - Single BC1 Controller, all zones different
06:35 Wiring option 3 - 3 BC1 Controllers, all zones independent

[AngryGMR]

Coulda used this last week when I was freezing my ass off trying to wire these up for my wife’s Xmas gift.

[jayward]

Hi I have a question. Do you have to choose a color every time you shut off your vehicle or will your last choice always be there by default ?

[Shrawr]

When I turn my headlights to the off position I still have the low level lights on. I have DRL connected to the F52 fuse and the app isn’t connected. Is there no way to have the engine running with the lights completely off?

[johnathanpessetti]

That’s too complicated, make it plug and play and don’t make us order three modules.

[dugjay]

I'll wait for the plug and play version.

[alexlemire]

can i use the other 2 outputs on the BC1 for other color areas on the headlight ?
for example 1 output Demon eye and outer HALO and the 2nd for inner halo ?
or one output per individual area of RGB ?

[richardbarlow]

Does the white outer light turn off - mine stays on

[assassin]

Hi, great video. When i connect it using the 3 bc1 controller would i connect both outter halo to one port on the one bc1 controller or do i use 2 ports ( one for each headlight)?can i cover the exposed cables wit electrical tape?

[dennisconner]

Where did the battery post extensions come from?

[mohamedqahtani]

I installed them on my jeep and I noticed some flickering ( beam isn’t constant ) why is that?

[wadewolf]

What is off to the left that you keep looking at?

[villavids]

Needs to be plug and play. Not this pig tail mess.

[MikeyP]

You need 6 bc1 all together? Or just 3 for both headlights?

[gman]

What are the state la s for doing different colors for the front of the vehicle. I know in Delaware, you can’t have a stove or any red or blue up front unless you are police or fire departments respectively.