ATU 100 (EXT) Antenna Tuner Firmware Update-Links and information

preview_player
Показать описание
ATU TUNER PURCHASE

Amazon Pickit Tool purchase

ARCELI PICKIT3 PIC Kit3 Simulator PICKit 3 Programmer Emluator USB Kabel Dupond Drah

Рекомендации по теме
Комментарии
Автор

I did this yesterday. It's not too difficult once you figure out what settings need to be changed in EEPROM. You'll need to change the display type, address, and offsets from the defaults if using an OLED. My display is address 78 type 05 offset down 00 left 00. Pay attention to the wiring when reconnecting the display. I built mine for QRP so I also changed the turns ratio to 5 (hardware change required as well), minimum power to 1 and maximum power to 40. Be sure you have the correct version of the firmware for your MCU.

Mike_Neukam
Автор

Do you have any links or info for how to do a firmware upgrade for the ATU-500w? Thanks

lzjranchshiawathahideoutby
Автор

Where's the link to the update page?

barrykery
Автор

Hi mate heared you on hubnet on friday was going to give you a call but then the door went LOL

NathanLiggy
Автор

Hi, Where i find N7DDC 1KW version (aliexpress) firmware ?

TAA-