etrailer | Comprehensive Review: RockyMounts VanTrack for Fork Mount Bike Racks

Click for more info and reviews of this RockyMounts Truck Bed Bike Racks:
Check out some similar Truck Bed Bike Racks options:

Don’t forget to subscribe!


Now this track is constructed of a durable aluminum with a black powder coat finish that is corrosion resistant, and the maximum weight capacity is 35 pounds per bike. The track dimensions are going to be 24 inches long, by four inches wide, and one inch tall. Now the channel length with these end caps on, are going to be 22 inches long. And this is really a simple installation. All you would do is place this track in the desired location, and then you would mark the holes, and then you would drill mounting holes using a 5/16ths-inch drill bit.

Now for a van interior, these rubber caps may provide sufficient hold, and eliminate the need for drilling. After you drill those holes, you would just remove the end caps, and loosely install the track hardware onto the bike mounts. And then you would just slide the bike mounts into the desired position, and then tighten it with a five millimeter hex wrench. Then you would just slide the caps back on as I'm doing here. And then you would align the track holes, and then install the M8 by 30 Allen bolt with these two M8 washers, and then an M8 nut for each of the mounting holes.

You would tighten the hardware using a six millimeter hex wrench, and then a 13 millimeter box wrench. And again, these included end caps really do give this track a nice, finished look. This does have a limited lifetime warranty, and this VanTrack is not fully compatible with DriveShaft track fork mounts, 'cause it cannot be mounted at an angle. Well, that's gonna conclude our look today. Again, my name is Andy.

Thank you for joining me..