Mercedes W212 | Replace Cabin Air Filter Easy DIY

How to replace the cabin air filter / combination filter for Mercedes-Benz E-Class W212. Tension spring for the air filter holder missing is really common. Don’t worry to much if you don’t have them. I order the tension springs next time I need more spare parts, they are really cheap. Part-nr A0008353134 around 2 euro each!

We got a lot of fine dust from the mine here in town so I guess it could not be to bad with this more expensive (FreciousPlus) combination filter from MANN! Choose whatever brand you feel comfortable with. I don’t know which brands that’s are the best!

Buy Links!

[bobistefanoski]

when was the last time you changed an old filter?

[MarioMartinez-tpne]

Blessed be those who put part numbers for everything in their videos, for they will be rewarded with subs.

[selimguclu]

I changed the Air Intake and Cabin filter this morning thanks to your videos mate. I appreciate youre work so much!❤

[DF-yhiy]

Excellent video as always 👍
I changed my indicators to the dynamic ones today.

[johnbates]

Good job mate. That cabin filter was filthy. So good to see you changed it. 😊

[stevenagans]

Great video. I pulled the original MB plastic slide lock off because the MANN slider was too tight.

[THELEGEND-cjst]

I love your work and video's +100K

[mcostafernando]

My W204 is also missing those springs, actually had no idea that it had springs there! 😂 Gonna check with MB Trucks if they have them in stock here in Brazil - the springs are also used in the MB Vito van - because MB Cars would charge me like 100 dollars for each clip haha

[arnoldvandergugten]

I tried to install this filter in my W204 C250 AMG CGI. But it was not fitting well. Too high and couldn’t close the slide. I have to return it altough it should fit according to VIN number.

[markymark]

Pro tip- don’t pull down the carpet at the start like I did. The Torx bit fell off the screwdriver and down under the floor pad. Never found it. Luckily I had another. Also, pay someone to do this if you have bad knees or back as a lot of contortions are needed to get the job done. I couldn’t get the Mann filter to lock, seemed a bit too big and had to put the OEM back in. PITA job.

[glupsification]

Hi, I am amazed at the accessibility of this filter, why try so hard.
I had a 406 and 607 Peugeot, I could change the filter without tools, in 3 minutes.
a bad point for Mercedes (I now have an S212), unless that is so that the owners come back to the dealership.
Best Regards
Eric

[christopherjacobsen]

Tjenare, kan det börja blåsa någon annanstans till och från om fjädern är borta? Tex om man känner att ACn lägger "av" för att sen starta men man känner att det blåser kallt ändå men man känner inget i utblåsen.

Can the fan outlets stop blowing if the airfilter springs are gone but it still feels like it is blowing from somewhere else for example when you use the AC?

[MrHondata]

Nice video as always.where can I find parts catalogue code diagramme?

[fury]

Question. 3 zone climatetronic. Driver side coming sometime hot air out and in the same time passenger side cold as I set up. What can be the problem ?

[glasser]

FYI: at the begining when you disconnect the TEMP PROBE to remove plastic cover...
this creates a DTC FAULT in the HVAC Module !!!
Connect your ODBII scanner to clear that fault (Faults introduce network latencies that add up)
👍

[ZakiGarage]

Damn how old is that filter 😆. Did you notice any unpleasant smell from the new Mann filter? Both my MB and Mann filters had a bad smell even new.

[Jaang]

I did this an then the temperature sensor code 911315 - " right vent temperature sensor faulty

[fury]

Why my ac get ice and blocking the air flow to the cabin inside ?

[gigihentz]

where the hell did the filter collected dust when is snow out there everywhere, everytime ? :):)

[EnjoytheMoments]

👋 Hi! My metal clips are missing too, do you think it's a big deal, or leave it alone? 🤔