This video will make your Life easier. Copper from thin Wires, quickly and easily in just 8 Minutes.

This video will make your Life easier. Copper from thin Wires, quickly and easily in just 8 Minutes | 3 Mega ideas.

With this Knife, you can remove the insulation from Copper Wires in just a couple of seconds.

Top 3 Best DIY Wire Stripping Knives.
How to Quickly Strip Copper Wires without Tools.

Best Knife for stripping wires | Make it in just 5 minutes.

How to strip insulation from any copper wire in 5 minutes. The best method.

#copper #stripper #cable

Best Tool to Clean Copper Wires from Insulation.

In this video I will show you how to make devices for stripping copper wires and cables, this machine will help you easily remove insulation from any copper wire,
You can make this machine with your own hands, easily and simply from almost improvised means. This is the simplest cable stripper and you can easily clean large quantities of copper cables in a short time. This is the simplest machine for cleaning copper wires, even a child can make it.

__________________________________

How to make a copper wire stripper, how to make a machine, a cable stripping machine, a do-it-yourself machine, how to strip insulation from a cable, how to strip any copper wire, a cable stripper, how to easily split a cable, a stripping tool, manual cable stripping machine, copper, how to clean copper, how to burn copper wires, copper wires, copper cable,Copper, how to burn copper wires, copper wires, copper cable, how to strip insulation from a cable, how much you can Earn, non-ferrous scrap metal, handing over scrap metal, searching for Scrap metal, how much you can earn by handing over copper, how to strip a cable, how easy it is to cut a cable, copper, a lot copper, how much is a kilogram of copper, where to find copper, medi,

[xznbqsx]

Big wires are easier to strip.
Small ones are the problem .
Very smart way for small cable striping.
Thank you😊.

[bormatnor]

I for one love it, simple and functional and adding or subtracting washers for spacing is a simple fix.

[StoicRipple]

Genius! Genius! Genius! I was using my fingers to keep the wire in line. Gonna try this soon as I get back to the shop.

[m.weston]

So every time you change to a sharper blade, you drill a hole? Why not make a blade clap that you can just keep moving the blade forward by loosening a bolt?

[Moonshine]

Bro you sure are a hero in the first part of the video with the small wire i always left the rubber stuff on it cause it was that little now i can do that with the small wire i got at home cause i have over 900lbs of it

[SCRAPASSASSIN]

Very interesting, I will have to try to make the last one you done in this video to strip thin copper wire, Nice one @King of Copper👍

[bpqnrzp]

Подскажите пожалуйста каким сверлом вы сверлите отверстия в лезвии ножа?

[michelegregg]

In my opinion nothings to small when you broke? But very well thought out and mindful enineering, but surely would live tk see how to strip the big wired from its insulation, that would be every bit worth thw watch.

[zpelpic]

If you figure you time stripping the small gauge wire and cleaning up the mess you can just sell the whole thing as number 2 insulated wire and use your time wisely.

[motopumpkin]

Please don't hold the razor with your finger! If that bit caught and spun the blade...

[bcde]

Esse eu acho que foi um dos melhores parabéns pelo vídeo

[ezequiasjonaslima]

Top não vou perder meu tempo, obrigado irmão 💯👍👏👏👏👏👏👏🤝

[yrnbvex]

Спасибо огромное за видео! Просто и эффективно, повторил, получилось!
А стокими как проводами?

[adrianochoa]

That is so damn awesome, I have to make those kind of DIY tools to start peeling all the copper cables that I sell at the scrap yard.😊👌🤩🤯

[steelman]

You really need to mount that blade while you are drilling holes because it will chop you up if the bit gets caught and spins it around in circles!! Very dangerous! Just use a simple potato peeler to strip the coating off of the wires!

[RolandJessberger]

I used the utility knife and washers way of doing it I have tried so many different ways and this way is the cat's ass I'm mounted it on a 2 by 4 after drilling a hole in the back of the knife and bolting it to a 2 x 4 vertically then bungee cord the front of the knife pulling it down now I can just start the school and Walk and Walk and Walk and it does the work by itself it is fantastic

[benjaminbrower]

You could flatten them to use in creating your own circuit boards. Thin plastic, cardboard.. then lay down the flattened wire. Drill the holes for components. That wire would be great for your own circuit boards.

[red]

Most small Guage wire is easy if you start the coating and just pull you have less loss😢 especially if you go to deep and fray the wire.
This is especially true for stranded wire solid wire not so much.

[quentonkilgore]

Holding the blade down while drilling it is such a good idea. Ask me how I know....

[familydogg]

That copper ironically will cut your hand like a razor