Jeep Gladiator How to replace halogen to LED - Headlights, Fog, Fender & Reverse Light | DIY Install

Tired of those stock halogens? Here's everything you need to change out your Jeep Gladiator or Wrangler Headlights, Fog lights, Fender lights and Reverse lights with LED bulbs.

What you'll need:
- 8mm socket
- 10mm socket
- Small Flathead screwdriver
- Pry tool for plastic retainers

Bulbs I purchased:

Filmed on iPhone 14 pro max
Edited on iMovie

#DIY #Jeep #Gladiator

[seanjohnson]

Much appreciated, after hours of research, this was the most detailed video I ran across. Great job my dude.

[ForgotAboutBrian]

Just knocked all of this out. Wild they still sell 2024 models with halogen anything.

[MeatyGoulash]

Really appreciate the links for all the bulbs. Ordered the wrong fog light. Everything’s apart. Luckily Amazon has that quick overnight delivery. You saved the day sir

[CABLEGUYU]

Thanks for pointing out clearly how the Fog lights do have specific Top to bottom tabs on the replacement bulb insert.. this helped me greatly get mine to seat correctly...

[jkeithv]

Thanks for the video. It would be nice if you would actually show a close-up of the bulb itself see the design and just how the LEDs are arranged on it. Also, it would be extremely helpful to show a comparison at night up the headlights on high and low beam with both the halogen and led to do a fair comparison. It's nice to know what the beam pattern looks like and that they're not just scattering light all over the place.

[obrianmcc]

I just installed the Beamtech H13's in my JT and they work great. No Tazer needed. The DRL's plugged right in, but in my case the Fog Lamp or Driving Lamp replacements did not .. the Fog Lamp bulbs have alignment ribs for both the lamp housing and the OEM plug. Once I stared at them for a minute or two I opted to shave off the offending ribs that did not align with an Exacto Blade and that fixed the issue. Once the new bulbs fit the housing and plug they worked perfectly. I found this issue reported online with other H16 bulbs ... so it's not just a Beamtech thing. The LEDS work great with the Jeep Halogen reflectors ... good cut off, just make sure you have them adjusted properly.

[MattGraunke]

Hi, the link to the headlights is broken, can you share a new link?

[patrickdaugherty]

Excellent tutorial! Used it tonight to swap out for LEDs in my 2021 Wrangler 80th Anniversary Edition and it was a breeze.

[edwardwhite]

Can you tell the model headlights you got? The Amazon link is no longer valid. Also oddly enough every bulb says it doesn't fit my 24 Gladiator for some reason but I just saw you put them in with no issue 😂

[kevinvoyer]

Now after it’s dark, on a long two lane dark road, you will need to aim the headlights, so you’re not blinding oncoming drivers. If you noticed the illuminating led elements are placed on two sides of a blade, on the flat post of the “bulb”, most of the best LED’s will allow you to rotate the blade within the body of the assembly, after it’s locked in to the housing. What that enables you to do is to be sure the reflective areas within the headlight body will properly reflect the illumination and create a nice sharp cutoff line when the low beams are on. That was the illumination is directed to exactly where it’s most needed. Good luck. The Fog lights should also have some type of aiming mechanism, to keep the illumination down below the bumper line. As that’s what fog lights are for, to illuminate the painted fog lines in the road, without causing glare reflection back at you.

[apexbmx]

How’s it holding up? Any flickering? Need to flash the PCM?

[dahesq]

When you click the links, multiple items are available to choose from. Can you also provide model numbers so I don’t make a mistake?

[grayman]

Just added these lights to my 2024 Jeep Gladiator Sport! Great job and thanks for the help.

[rr-bngu]

What brightness of headlights did you use? The link doesn't exist

Nice video any issues warning lights or flickering?

[jonathansantoro]

What was the answer to this? I just swapped to LED and am getting a “turn signal lights out” message even though they work. Also, my headlights work but when I switch to high beams it gets dimmer?

[XxhowlerxX]

ive been looking for a video like this Thank you! i have a gladiator that needs these changes

[humorss]

the jeep light housing is decent once a bright bulb is installed, the beam pattern is better than most aftermarket LED units.

[Ice_Diver_Ed]

You can also do the stop/tail/turn in the rear, but might need a resistor for them as it throw's a code every so often.

[donwatkins]

can't see how you got the factory bulb out!!!