Learn PDR Online - The 10 Steps To PDR Glue Pulling

Today we're going to take you to step by step through the process of glue pulling for paintless dent removal.

===

If you have any questions or you would like to learn more leave a comment below the video and I will try and help as much as I can.

-=-=-=-=-

SUBSCRIBE FOR MORE CONTENT

If you like my content, then please consider Subscribing to this YouTube channel and Liking my Facebook Page to be instantly notified when I release new content for you! ;)

YOUTUBE - Subscribe to my YouTube channel here:

FACEBOOK - Connect on my Facebook page here:

-=-=-=-=-

Want to learn more about Paintless Dent Removal and how to learn the actual skills you need to get started and be successful in PDR? Then make sure to visit the Learn PDR Online website below:

[tommyvyvial]

Thank you very much. Just bought my kit.

[cordarin]

Methylated spirits is called Denatured Alcohol in the states, for anyone wondering. Excellent videos, ty for the lesson

[heavyriff]

Nice video, although I think assessment of the environment would be first to put the right glue in your gun as some clues are better in different environments. Good explanation though.

[supercraps]

Thanks, Tom! Your an expert and I enjoy learning from your Great videos.

[NVFM]

Hi mate, I’m new to pdr, for some reason my glue sticks very well to the panels but doesn’t stick to the tab very well, is there any advice you could give me as I’m not sure what am I doing wrong

[yolosho]

You didn't say how long you let it set up...the most important part??

[kevinconroy]

Wouldn’t a microfibre cloth be better than a paper towel, reduce the risk of scratching.

[williamriley]

Really... A gas powered glue gun...??? Be a little loud in a shop enviroment wouldn't it...???

[poiulkjh]

Hi Tom, my name is Brian Davies, I got myself a new Car 8 weeks ago, only to have some Tw*! run into the side of it! and then drive off! Cost of the repair!! £500, Not Happy at all, so I started to Look around at a solution to my Predicament, as I had spent all my cash on the new car! and to go thru my Insurance was way to much! Now I came across your sight! among-st some others out their! I was Very Happy how you explain everything! so much so, I went and bought myself a P D R starter kit for £80. And today I had a go at fixing the Dent!!! well after around 4 hours!! of pulling and hammering, I am pleased to say I have a Result! It's not perfect yet! But will Have another two or three hours on it tomorrow. So as a Novice I can say that if people listen to what you have to say! and do not go at it like a bull in a china shop! you will get very pleasing results. So Many thanks Tom, and I will keep watching your sight.

[АлександрСилин-пы]

Привет Том, какая оптимальная температура клеевого пистолета должна быть, для правильной работы клея? Спасибо

[PHDALI]

Hey Tom.. can you do a glue pulling on top of 3M film on the front of the vehicle?

[TheMarpalm]

I have subscribed and enjoy your videos and have learned a lot. Can you focus one discussion on pulling aluminum? More vehicles, including all F150s are made of aluminum. What I have found is that aluminum seems more resistant to pulling. Any help would be appreciated

[richarddelgaudio]

I tried a kit from a store and the tabs are all bad and the tool made the dent worse, my advice is don't use the cheap kit get help at qualified shop.

[mullervolker]

methylated spirits are what exactly? for foreigners.

edit: spiritus over here

[ads]

Hi mate, thanks for the vid I learnt a lot.

I tried PDR on my car with some minor dents, however I had some issues and I'm wondering if you had any advice. First was the glue was very hard to remove in some cases. Often the tab came off but the glue would remain. Metho didn't seem to help much.

Other issue is the glue takes some small paint flecks with it.

Is there any way to avoid this? Am I using the wrong glue?

[michaelclark]

When do you use the dent repair lifter and the repair "bridge? Are they for certain dents in in deferent areas? What about the slope on the front of the roof?

[richarddelgaudio]

Can I find slide hammers specifically for pdr?

[music-wded]

What glue is this? How do I know what to buy since I do not have a PDR store in my area.

[carspadetailingprofesional]

Buenas noches soy de Colombia y quiero aprender el arte del PDR pero no sé inglés solo español tienen algunos vídeos que me ayuden un abrazo desde Restrepo Meta Colombia

[wendywhales]

Very clear thank you..Yes I did burn my finger. Lol.