Stampede 2wd brushless 3s conversion and upgrades

preview_player
Показать описание
Some basic upgrades for the 2wd brushed Stampede. Tekno steel axles, Onyx brushless system, steel gear servo and aluminum servo saver, aluminum shock caps, and 22/86 gearing. There are MANY ways to upgrade your Stampede, these are just the things I chose based on what parts I’ve broken in the past. Have fun!

Onyx brushless system - ONXS0500
Tekno driveshaft kit - TKR1951X
Tekno Stampede axles - TKR2210
Wheelie bar - 3678
Aluminum shock caps - 3767a
Battery expansion kit - 3725x
Servo - Amazon 35kg
Servo saver - SHS88H
Spur gear 86t - 4686
Ball Bearings - 5x11x4mm (4 required for front spindles)
Рекомендации по теме
Комментарии
Автор

Is your original stampede brushless? If yes, did you upgrade the gears, I bought a vintage stampede and dunno of the original gears work either brushless

WowoodogPlays
Автор

Hey, very useful video! I am upgrading my Traxxas Bigfoot (which is basically stampede with a bigfoot body) to 3S with Hobbywing 10BL120 brushless combo, and when I try to screw in the motor into the stock holes for the smaller pinion, the gear mesh comes out too tight. The holes are set by some sort of motor bracket which is made out of soft plastic. I guess I could just widen the hole a bit, but then I'm afraid that the motor wont be held in place as securely as it should... Did you have a similar problem with your 3S system?

TagirKhabibullin