filmov
tv
Auto to Manual Transmission Swap DIY |JZX90|CD009| Step-By-Step Guide for Mark II, Chaser, Cresta
Показать описание
As prices for manual JZX Mark II, Chaser, and Cresta continue to soar, some may find it more feasible to purchase an automatic JZX and use the savings towards a manual swap. Automatic cars are also generally not quite as beaten on as manuals. This guide will show how to perform an auto to manual conversion. We will be removing our original automatic A340 transmission for a new CD009/JK41B 6 speed transmission in this video. The process is generally the same for all manual transmission swaps.
________________________________________
Notes:
~Consider changing your rear main seal while you're here. 1JZ/2JZ OEM part number: 90311-90006
~Bedding in the clutch is very important. It's extremely tempting to want to drive hard after all this work but be patient. A poorly bedded and glazed clutch will feel like your car is low on power and your new clutch won't ever perform like it should.
________________________________________
Supplement videos:
________________________________________
Parts:
~ All these swap parts can add up so take your time shopping for the best prices to save where you can. I'll admit at the time I felt I was in a pretty good place financially and didn't try too hard shopping around. This is a terrible mindset to have. Don't do this. ALWAYS save where you can. Also sometimes waiting till Black Friday pays off.
Here are some parts sites I've used with positive experiences:
________________________________________
There was a lot of info to cover for the swap and I'm sure I may have missed something while editing so feel free to ask me questions or DM me on instagram @JZX_Kenny.
________________________________________
0:00 Intro
0:41 Chp 1: Removal
8:07 Chp 2: Flywheel
9:15 Chp 3: Clutch
11:16 Chp 4: Prep
15:07 Chp 5: Fitment
16:59 Chp 6: Install
20:23 Chp 7: Pedal
23:59 Chp 8: Electrical
27:32 Chp 9: Driveline
28:55 Outro
29:54 Cost
________________________________________
Notes:
~Consider changing your rear main seal while you're here. 1JZ/2JZ OEM part number: 90311-90006
~Bedding in the clutch is very important. It's extremely tempting to want to drive hard after all this work but be patient. A poorly bedded and glazed clutch will feel like your car is low on power and your new clutch won't ever perform like it should.
________________________________________
Supplement videos:
________________________________________
Parts:
~ All these swap parts can add up so take your time shopping for the best prices to save where you can. I'll admit at the time I felt I was in a pretty good place financially and didn't try too hard shopping around. This is a terrible mindset to have. Don't do this. ALWAYS save where you can. Also sometimes waiting till Black Friday pays off.
Here are some parts sites I've used with positive experiences:
________________________________________
There was a lot of info to cover for the swap and I'm sure I may have missed something while editing so feel free to ask me questions or DM me on instagram @JZX_Kenny.
________________________________________
0:00 Intro
0:41 Chp 1: Removal
8:07 Chp 2: Flywheel
9:15 Chp 3: Clutch
11:16 Chp 4: Prep
15:07 Chp 5: Fitment
16:59 Chp 6: Install
20:23 Chp 7: Pedal
23:59 Chp 8: Electrical
27:32 Chp 9: Driveline
28:55 Outro
29:54 Cost
Комментарии