Making a Naked GoPro 11 - Real Estate FPV

0:00 - Intro
1:52 - GEPRC Case Unboxing
4:55 - Tools Required
5:38 - Disassembling the GoPro
20:43 - GEPRC NAked GoPro Assembly
33:16 - Power On
34:52 - Flywoo case vs GEPRC Case

__________________________________________________________________________

Support the channel by clicking these affiliate links when purchasing parts at these sites!

__________________________________________________________________________

Just getting into FPV?
This kit includes everything you need to get started!

Frames

Flight Controllers

Motors

Digital DJI System

TX/RX

Batteries:

Recommended Budget Gear:

Other Equipment:

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

[AcruxFPV]

This is such an excellent tutorial mate! Naked GoPros are a must have for cinewhoops and smaller quads. It's an expensive process making one, so thank you for such a detailed instructional video. I've been on the edge of doing this and you've just made it so much clearer and an easier DIY. 🙏👌

[kreinova]

You can add conformal coating on the boards also as now it is not waterproof + have a fan when being used to capture waterfall or something related to water and moisture. Now you got the perfect naked camera for everything.

[LiverpoolFPVHub]

Just followed your video to complete my first naked GoPro. Thanks, turned out great. 👍

[biglakefpv]

Hi thanks for the amazing content on your channel.
I have taken my gopro 9 apart but in the process the ribbon cable came out of the lens and i can't seem to figure out how to get it back in a small black strip came out at the same time . Any tips. Thanks ian

[AlyxFPV]

When i was taking my GP9 apart, i actually didn't use a saw, iv just took some razor blade knife and slowly slide it on the back where screen is glued to

[sten]

a few tips: in the manual they use heatsinks on more chips. also when applying the board to the case it seems that the heatsink is to thin compared to the board, it doesnt touch the case.

[KineticAirRgV]

I am getting a GREEN light not a BLUE, with a ‘not enough power’”. I read that there is a GoPro labs update with the QR code obviously and it can be done if you connect the original battery only? Can you maybe if possible if you’re super kind to make it to where I can put the battery back on and I can, or we can figure this out of the whole? Did you do that QR code before ?

[DIYOriginal]

Awesome tutorial, well explained and very clear voice 👍🏻👏🏻👏🏻👏🏻
I'm planing to do a naked GoPro 11 Cam & the case from GepRC, is very Cool. CNC make in aluminium..very clever design.
Thank you for sharing this info with us and keep the good stuff coming..
Bye !! 👍🏻👍🏻👍🏻

[kreinova]

20:57 You are so true when you decided to take the shiny frame part behind the screen. This is because GoPro 11 utilizes LCD screen, not OLED. LCD has backlights, where you see the white back part of the screen. It actually translucent when the LCD is turned on. The lights will be reflected through the back and bounced back to the shiny frame part behind it thus increase the brightness and make the screen looks nicer. Same concept as LCD in laptops where they paste an Aluminium Sticker sheet on the screen assembly. 😊 nice job!

[Birbal]

Thank you so much again for this detailed video! I was afraid to do it myself but after I've seen your very nice explanation, I've decided to give it a try. It worked very well. I had a slight moment of sweat when was not initially turning on but it turned out that the ribbon cable provided in the kit is a bit too big and one of the connector popped out when I put the case togheter. I've added some tape to prevent from happening.

[jurgenaquilina]

following this guide makes it just a breeze to finish. amazing walkthrough!! thanks!!

[smartaIec]

Don't know if you saw, but they have a case for the 12 now too. I don't think the internals differ from the 11 but the 12 has HDR which is huge in my real estate experience

[quorumgroup]

I'm getting a low power warning on the front screen on the GP10, the record button also doesn't work for video/photo/timelapse using the button or the app. Any suggestions?

[NemoFPV]

Excellent tutorial, thank you!! Just finished my own build and couldn't have done it without a video like this. Was a hell of a struggle still 😅

[creativesymon]

Great informational vid. Wish they'd make one for the 11 Mini.

[quantum_mchanc]

I have the GEPRC naked 11 and love it. I wish there was a better way to manage it remotely from my phone. I'm under impression that we can't upgrade the firmware, so the new app doesn't connect and preview video feed. Any info on this?

[drcobb]

thank you for the tutorial, have you seen the kit by Kona FPV, you can use normal lense mounts (so good for all the different branded ND filters)

[karon_pcmr]

18:10 that's not a heat sink, that's TIM (Thermal Interface Material).

[johnnycovington]

Would love to see a video of you talking about the actual rates you like to use and why when shooting things like real estate video!

[Netaction]

Very interesting video. So the original USB socket has two cables? Below the lower cable are nine holes in the case, three by three. Why? Is this something like pressure equalization or cooling?