How to install gutters/guttering on a shed with easy to follow steps and top tips! #shed

In the final part of the shed videos i will show you how to install guttering on your shed, this will take the surface water away form your shed and prevent the base of your shed from rotting.

Amazon Links to the tools and materials used:

The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases

This is an easy DIY project that will help prevent your shed from rotting for as little as £30. The first step is to decide on which way the water will need to fall and where you are going to locate the down pipe. You then need to make a line with a fall of about 20mm over the total distance of the shed, a string line is ideal for this.

Install the guttering brackets using domed head screws as they will be tightening onto plastic. You can secure the hopper to the same line as the brackets to ensure the guttering will run straight.

To fit the guttering end cap and also put the guttering into the hopper use petroleum jelly to help the joints slide together.

The downpipe is installed using a similar method and the final position of the downpipe will determine if you need to create a set or if you can just use a shoe on the end of the pipe.

#shed #gutterinstallation #sheddesign

[MMG_MoonManGuitar]

Cheers Fowler. Just fixing some guttering today myself. So ideal tips esp the petroleum jelly for the rubber seals. 👍🏾👍🏾👍🏾

[iammine]

Just found your video. Excellent job. You kept it simple and loved the PVC piping you used as a down spout. Thanks so much for posting.

[John-llhi]

Exactly what I was looking for. Thank you!

[BUREAUTOM]

Great advice. Very clear and easy to follow.

[davesmith]

I love your content in these videos, easy to follow with sone great advice!

[jameswburke]

Thanks for that. I don't have a chalk line, so I just used a homemade string plumb line between the two end brackets then lined up the middle brackets to the string. I also added a baseboard first as I had some spare timber. It rained last night and it works a treat!

[haliec]

Thanks
I'm going to attempt this in the spring. Easy to follow guidance.

[andybuchan]

Very helpful and great detail. Thank you.

[LS-hqqe]

Really well made video. Has helped me a lot. Thanks

[lottielewis]

Thanks for this. Such a helpful and thorough explanation. Let's hope mine works out so well 🤞

[TheExStig]

Great tuition man. Intend to do this job soon and have learned so much.

[starwarsmad]

Great content I will doing this on my shed soon

[jiggadaboom]

Great content dude, easy to follow. 👍🏻

[jeffjeffjeff]

Fantastic video, thanks for taking the time to share it. You've got +1 subscriber from me mate. Cheers

[lyndawebb]

Thanks for some good tips, I’ll just have to adapt the last bit as I want my rain to run into a water butt.

[xud]

Great video, just bare in mind that petroleum based products will attack rubber, silicone grease is the recommended lube for rubber.

[dolphinliam]

Great video. To stop the downpipe dropping, I put 1" self tapping through the brackets and pipe with a neoprene washer between the pipe and bracket.

[kooga]

Will be my first attempt, now single I have to try things and I hope this helps

[jadedoptimist]

Great job! I hope I don't goof up my shed.😬

[solve]

Video shows both ends done with gutter clipped in place but he would have had to take the gutter off again to fix on the centre clip and as someone else commented downpipe at the end of video appears to be on a different shed.