How to use the different OUTPUTS on a mixing console | Understanding Mixer Outputs

In case the numerous output busses and connectors in your mixing console seem overwhelming and somewhat confusing as to which one to use and for what purpose, then this video should help you out.

Check out the additional videos mentioned in this video:

[gak]

Great concise, accurate and logical explanations. Thank-you!!!

[teashea]

intelligent and articulate tutorial - very good production values also

[sammiblackabel]

Wow I really lean three to four thing out of this
That's awesome 😎😎

[johnude]

I really do enjoy your videos and they are well explanatory. But i have few things i need clarity on how can you connect your subs on different output on the mixers to make them stand out in the mix

[storiesoftheamericansouth]

Thank you for your work! I bought a used yahama mg32 for $150 US. It was very dirty. Strippped it down to the chassis and cleaned it. Was very careful w the contact cleaner, but many pots are still scratchy and the channel 24 button won’t turn off. So I’ll need to clean again. Do you have any tips on cleaning the pots really well? Also the right channel never reaches the stereo mix, but it is there in PFL. Any thoughts on that? Keep up the great tutorials. You’re the reason I went ahead and gambled the 150 hoping this thing would work. So thanks!!!

[bigjoe_official]

Great explanations but i wish you to support it with phyiscal demonstrations for better understanding

[jewelkieran]

I have really learnt a lot from your videos. Thanks for all you do. Please can you do video on how to connect and use a cross over. dbx 234 to be precise. Thanks

[wilfreidngarbe]

thanks 👍, please could you release a video on how to use the Sub output

[derekdiamond]

Great stuff, but how can I plug a none powered 4 channel mixer into a 6 channel powered mixer. There is no XLR on the 4 channel channel mixer. Great video, thanks for all the info.

[chuksfavour]

Omooooò. U said lot of things but I feel u need more illustrations for better understanding. Thanks

[GreatCorban]

Yh thank you sir Kelvin


But can you make a video on basic things yo note when mixing pive sound, like, how the drum should sound how loud the vocals should be etc just stuffs like that?

[chiemelieijezie]

Hello bro…thanks for your videos. Please which mixers come with direct outs

[ztskjwj]

good day sir....please can you do a video on the setup of an alesis divi5 drum module and how it works for me🙏?

[MegosilSounds]

Thanks bro.. but is there away I can work a talk back mic system so the band can hear ourselves.. with or without the mixer

[kobinawilliams]

Nice video but I have a question. Where exactly does the Direct Output output to? Cause if Main could go to Front of House and Matrix could do same, where does Direct ouput go if it outputs only from one signal source. Let's say you're doing a live show, does it mean each Direct Out will go to it's own speakers? I'm confused

[gilbertmensah]

Good evening Boss I like your tutorial but with the demonstration aspect of your lesson. Please I would like you to show or point out exactly what you saying or teaching, thank you.

[bendebenjamin]

Pls I still find it hard to do the connections as in grouping, pls can you be specific where exactly to input from the mixer to compressor and from the compressor back to the mixing console.
And while grouping, the main output will still be use or it won't.

[ifesimlevi]

Please teach us how to set a graphic eq on a mixer 🙏

[derrickdabbley]

That was great bro. Could you please do a video on soundcraft fx16ii for me? Thanks

[allinonechannel]

Can we give active speaker to group out in the mixer?