Power steering fluid flush, without pump in less than 10 minutes/Power steering fluid change #shorts

In this video i will do a Power steering fluid flush, without pump in less than 10 minuets

Flushing power steering fluid and eliminate power steering pump noise. this video will show you complete power steering flush of the system step by step...

[TheBigdog]

People say it's a waste of time but I've been changing PS fluid since the 90s. I've never had a leak or a problem and it makes the steering so smooth.

[DennisMartinezCalifornia]

"babe come to bed"
"I can't, I need to see how to change my power steering fluid 😡"

[hunterparker]

No talking but informative as ever, very helpful thanks!

[midnightrider]

Another great video sir. This was a good P/S flush. I think it very thorough and was safe because you did not dry run the pump. About as good as you could have flushed it without an external pump. 👍🔧

[chicagorc]

I know damn well this took more then 10 minutes lol

[Methodical]

This shows you don't need anything fancy to get the job done. I use the Thornstone 2L Vacuum Bleeder instead of having to turn the wheels left/right to force the fluid out. This made flushing the fluids a breeze. Filled the reservoir with fresh fluid and used the vacuum to pull out the old and pull in the new fluid. This method introduces no air into the system.

[MrTheHillfolk]

Power steering pump flow is alot more than folks think.
We used to disable the fuel or ignition and rotate the wheel while cranking the starter and a helper keeps the reservoir full.

[jakethesnake]

Beautifully done. I work at a quick lube shop that does power steering flushes. The machines we use do basically the same thing as this. It's just more expensive and a tad easier. But if I can afford the fluid and work but not a machine. I can totally do this. Great job.

[igotstoknow]

I replace the tank fluid once a year.
Never had mechanical issues and leaks. Runs as good as new.
Same with coolant and blake fluid changes.
Zero leaks and breakdowns.

[FunWithGuns]

Make sure to keep the reservoir topped off as you do this as not to introduce ait pockets. Best to jack the front tires up first and don't do it too fast or go all the way to lock and bang the wheel hard or it'll make a mess. Smooth back and forth motions will move the fluid through the system. Make sure to use the right fluid too. Lots of brands take brake fluid and not a generic power steering fluid.

[MitchelPie]

I bought a hand siphon pump for 9$ at princess auto with a little hose that sticks in there

[MrZdvy]

No need to remove and install the hoses. Just emphty and refill the reservoir. Start the engine and fill the oil to the mark on the reservoir. Repeat this a few times until the oil is clear, simple as that.

[willmann]

I swear you do such fantastic, clean work. Excellent channel and content 👍👍

[khalidmuhammad]

Please make a full video, this need to reach as many as possible
Thanks

[shawnd]

Don't do this. Waste of time and you're going to make a mess. Pump the old fluid out with an old shampoo or soap pump until empty. Replace with new fluid. Start the car and turn the wheel back/forth 10 times. Empty the reservoir again and refill. Do this as many times as you want.

[juniorgemini]

You made so easy to do thanks bro 🙏 🙌 💯

[moemoe]

The V6 2grfe is so nice and powerful never owned a 4cyl yet

[oldschooldude]

Slick. I always run the return line down to a catch and clean up the excess.

[justinmckey]

Lmao, awesome video but sounds like power steering was the least of their issue

[brettconv]

This is also a great way to bleed air from the system when installing a new steering rack or pump