filmov
tv
How to Install Windows 10 from USB? | Windows 10 Installation Step by Step
Показать описание
Timestamps:
Introduction: 0:00s
Step 1: Format USB flash drive and Set the Primary Partition as Active 02:22s
Step 2: Create a Windows 10 Installation Media 03:19
Step 3: Install Windows 10 from USB 04:05s
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
how to install windows 10 from usb flash drive for free 2020?
First, you need to prepare before you go for installing Win 10 from USB.
• Get a USB flash drive having adequate space of at least 5GB.
• The USB flash must be formatted. (and if you don’t know about that, we will discuss it a bit later)
• A technician PC which will be used to format USB and a destination PC where you’ll install Windows 10.
These were some requirements you should have before go ahead. Let us now come back to the how-to create windows 10 bootable USB solution.
▼First: Format USB flash drive and Set the Primary Partition as Active
Step 1 - Firstly, connect your USB flash drive to a working PC.
Step 2 - The most straightforward way to launch disk Management utility is by clicking on “Start” and then “Disk management”.
Step 3 - Start formatting the partition using the right-click button on “Format” option. Choose “FAT32” file system.
Step 4 - To set the partition as Active, simply right-click on the USB drive partition and click “Mark Partition as Active”
▼Second: Create Windows 10 Installation Media
Step 2 - Select the correct version of your system. It will be either 32 bit or 64-bit version.
Step 3 - Run the tool after installing it.
Step 4 - Accept the Application notices and license terms.
Step 5 - When its interface appears, select “Create installation media for another PC” and click on the “Next” button.
Step 6 - Decide and choose language, architecture, and edition. If you have to reinstall Windows 10 in the same PC, click on “Use the recommended options for this PC”. Otherwise, you can leave as it is.
Step 7 - You will be advised to select media. Click on “USB Drive” followed by “Next”. Click on “Next” once more. Wait for a few minutes for the tool to download Windows 10 media file for installing windows 10 from usb on a new computer.
▼Third: How to Install Windows 10 from USB 2020
Step 1 - Restart your PC and keep pressing on F2, F12, delete or escape key for the boot menu to appear. Select the choices according to your choice and click on the “Next” button.
Step 2 - In the next screen that appears, click on the “Install Now” button. It will initiate the Windows 10 installation.
Step 3 - Accept the license terms displayed on the screen. Again, you will have to click on the “Next” button.
Step 4: Select the installation type and decide if you want to upgrade the windows installation or install it in the custom way. Because we are talking about clean installation, choose “Custom install”.
Step 5: Your PC will ask you to select the partition where you want to install Windows 10. Choose it and click on “Next” button once again.
Step 6: The Windows installation will begin now. After installing the needed features, copying setup files, your system will restart.
Hope the above 3 steps can help to install windows 10 from usb flash driver 2020 for free without losing data.
#Wondershare #WondershareRecoveritDataRecovery
Комментарии