The Ultimate RF Remote Control Switch Review: Functions and problem solving

If you're looking for an easy way to control your home automation using RF remote switches, then you'll love this review of the Ultimate RF Remote Control Switch!

In this video, I will cover all of the features of this switch and how it can be used to control your home's electronics. We'll also discuss some common problems that users have encountered and how to solve them. So if you're looking for an easy way to control your home's electronics using RF remote switches, then be sure to check out this review!
this is a single-channel RF relay module for AC & DC.

**************************************************
[DISCLOSURES] This video may contain affiliate links,
which afford Techno Review 85 Network a commission should you make a purchase.
As an Amazon Associate I earn from qualifying purchases.

*****************************************************************
Please subscribe my channel to support me

********************************************************************
#technoreview85 #homeanimations #electronicproject

[greenmoss]

Excellent video. Thank you for helping us all out.

[ShowAllWorking]

Is the signal from each remote unique? Could you you use more than one set of remote and reciver pairs in close proximity without triggering all recievers at once? Like how your car key remote only unlocks your car not all the cars in the proximity.

[etherdominicgpoot]

What to do if the led in the relay is working but the current is not flowing to the NO even if I clicked the button but works in the NC

[KAPERSPISOWIFI]

Power supply for relay is different from the power supply for the light that it will control? How many volts is the led light?

[KHz]

Hi, I've tried using this kind of Wireless Relay with a Zero Delay Gamepad Board where I connected the V+ (12V) and V- (GND) from the floppy power connector from my PC and I connected the terminals of a button like this: [Button 1 +] in the NO (Normally Open Connector) and and [Button 1 -] in the COM (Commoon connector) but sending the signal to the relay activates it but the button doesn't get pressed (like it didn't make contact between the + and the - connector of the button). Also I checked that in the Zero Delay + and - connectors of the button there's a voltage about 4V. I didn't expect that the button connectors had voltage between the terminals.

I find it's weird that just making contact between the fast-on terminals of the button triggers it but when connected through the relay it doesn't acctivate the gamepad button.

Have you ever tested it with a Zero Delay USB Gamepad? ... or *any gamepad* ? I ask this because I used it for instance to make a switch to make contact between a data pin in my parellel port and a GND pin in parallel port but I fried my motherboard. I'm scared I could fry something else when using the relay to make the contact.

I hope you can give me advice with this.
Thanks in advance!

[Guasontv]

Thabk you. How did you rig up the battery? And what kind of rig did you make tonpower it?

[ronaldd.]

I have one of that, but strangely when I activate my device for a long distance (say 30 ~ 50 meters away) it works, and IF i deactivate it, for a strange reason it is not turning off, unless I get much, much closer to say: 10 meters. WHY?

[Rustyshackleford]

You have a video on using it as a wireless igniter? Ive been looking for days.

[jmepzpg]

so i would use mode 2 for garage door ?

[RND-USA]

Interesting! I have one that looks very similar but it’s from Qaichip. Instead of pressing the button to change modes, you use wire the unit in different way (in some cases with an additional thin jumper wire) to set it manually. Does your unit have a button that will allow it to forget the default remote codes and / or learn new codes?

[rajdattani]

Very well demonstrated, thank you!

Can you have 2 different connections on this module so that the 2 buttons operate them individually?
“Button A activates and deactivates 1 light while button B activated and deactivated a different light”

[ianmac]

Fantastic, ,, EXCELLENT ... thank you VERY much !!!

[dhakshinamoorthy]

What is the maximum distance which can be used

[fastbackray]

Can this remote be used for car central locking? If they same frequency

[atexs]

I bulid horn whit this modul but very short rf range how to extend long range? or my modul is not working ?

[jorambritstra]

Why do you need the second battery if the switch is already powerd

[hiteshbhaliya]

It is need to connect every time? Or only first time?

[jimbossemi-customs]

Very well explained my friend. Subscribed and bell on!

[rbansal]

Can multiple remotes be used with a Single module?

[creativitymeetsinnovation]

Sir, can I use any RF REMOTE? Will it work with any IR Remote ? Please do reply..