filmov
tv
272. So...you want accuracy? #mtbitesize #measuringtools
Показать описание
To create quality work, accurate measuring tools are essential. Many tape measures have a slight movement in the hook to account for inside and outside measurements—a clever design, but one that can introduce errors over time. Besides the hook, creases in the tape can also reduce reliability, and the tape itself can stretch or warp, making them less than ideal for fine woodworking.
For smaller projects, I prefer yardsticks and metal rulers—simple, reliable tools without any moving parts. But there’s a trick when buying them. Yardsticks are usually very accurate after the one-inch mark, but not always before it. I have three yardsticks in front of me, each with a different measurement up to the one-inch mark. When buying one, compare the first inch with the second inch of another ruler. If the first inch is longer, you can always trim it to size later, but if it’s shorter, the stick is useless. At this point, you can use a caliper to mark your stick…and as long as it’s aluminum, cut it to size with a sled.
Lastly, because a dented corner means you’re not getting a true edge, I have a rule: a dropped ruler is one I won’t use again.
Check out my other channel! → @makethingswithrob
Huge thank you to my patrons that keep this thing going!
*MAKER TEAM*
Michelle B
Keith Current
William L McNally
Jerry Adams
Rich Lightfoot
Tutor the Barbarian
Mike Lornitis
Les N.
Gary G.
Aubrey G.
Nukebert
Sam W.
Aaron Knows DIY
Doug F.
#MTbitesize
For smaller projects, I prefer yardsticks and metal rulers—simple, reliable tools without any moving parts. But there’s a trick when buying them. Yardsticks are usually very accurate after the one-inch mark, but not always before it. I have three yardsticks in front of me, each with a different measurement up to the one-inch mark. When buying one, compare the first inch with the second inch of another ruler. If the first inch is longer, you can always trim it to size later, but if it’s shorter, the stick is useless. At this point, you can use a caliper to mark your stick…and as long as it’s aluminum, cut it to size with a sled.
Lastly, because a dented corner means you’re not getting a true edge, I have a rule: a dropped ruler is one I won’t use again.
Check out my other channel! → @makethingswithrob
Huge thank you to my patrons that keep this thing going!
*MAKER TEAM*
Michelle B
Keith Current
William L McNally
Jerry Adams
Rich Lightfoot
Tutor the Barbarian
Mike Lornitis
Les N.
Gary G.
Aubrey G.
Nukebert
Sam W.
Aaron Knows DIY
Doug F.
#MTbitesize
Комментарии