2016-2020 Toyota Tacoma Leveling Kit Install

2016-2017 Toyota Tacoma Leveling Kit Install

THIS KIT WAS PURCHASED FROM VENUM WHEEL. Here's the link to purchase a kit. (My kit came with a diff drop, so you'll have to search for that elsewhere)

USE CODE: WelcomeVNM for 10% off. You're welcome :)

Follow their IG account @venum_wheel

[Charliano]

Must say, I am a Tech or an old tech from back in the day, First off, Toyota has the easiest Lifts ever and your video is great! My 2019 is going up this weekend.

[ryanbaker]

Just used your video to put MotoFab leveling kit on my 2020 Tacoma Sport. Did it in 6 1/2 hours. Fronts were pretty straight forward. The rears caught me. I tried to do with tire on. Big mistake. Taking tire off made access so much easier. Also putting the block under the spring. I had to use jack on front and one on back of spring to make room to fit block in. Then when I lowered the hole/pins didn't line up, so took some creative work with jacks to move/align pins/holes. Put block on axle pin, then lower jacks/springs on, then hit with mallet to get the pin on spring to go in block hole. Only thing I'm concerned about is the front spring rubbing the sway bar. It looks close. Might order the sway bar kit to move it 1" forward. It's only $30.00 and takes an hour. Love the height of the truck now. Ready for the next mod. Thanks for the video!

[kevinalexander]

alot of negative comments but my stock 2017 trd offroad had a slight rub with the 285/75/16 with some method race wheels 0 offset and i put a 2 inch leveling kit in the front with an alignment afterwards and its all good here.

[paulrevere]

why didnt you show a picture of the finished product? The video was going so well until you left me hanging.

[MartinM]

I ran a leveling kit on my truck for 3 years and never had issues. So all these ppl whining and leaving stupid comments go suck a phat one. I now have dumped 2k on baller suspension. All good truck drives like a dream. Nice vid

[billygoat]

Maybe I’m knit picking but to use the torque wrench to remove bolts is not recommended....as it can be taken out of calibration. Just a friendly two cents :)

[thomasmulligan]

My dad always to taught me to use the star pattern on the lug nuts

[stevelozano]

Note, you should probably use blue lok-tite to prevent bolts from loosening due to vibrations.

[SC_XOLOs]

@4:15. You’re using a torque wrench to break away bolts? 🤦🏼‍♂️

[ChosenGamingTV]

Bilstein 5100 adjustable shocks is the proper way to get a tacoma leveled, and not wear out other suspension parts or affect the ride

[renenavarro]

The sway bar disconnect off the spindle is an extra step. Not really required for the shock to come off.

[sneakers_and_stripes]

Very good video. I used it to install my level kit on my 2007 Tacoma.

[johnfletcher]

Would've been nice to see the measurements post install.

[advfamily]

Hi Chris! I just installed a 1 1/2” inch spacer lift to my 2020 TRD OR and your video took me step by step. Thanks!

[abdelkhan]

Removing camber bolts will cause you many issues. I found out the hard way replacing arms

[ryantran]

Perfect, exactly what I was looking for, a step by step instructional video with demonstrations. 2 inch spacer lift on front and 2 inch add a leaf rear for my 2018 Taco Pro

[kauaisfinest]

Always measure from center of hub not ground as it’s not accurate. Wheel nuts are supposed to be done in a cross pattern not in a circle

[damonmattheus]

Hey Luis Martinez. You will need a front sway bar re-locator. They are brackets that move your sway bar an inch forward so the coil spring doesn’t hit it.

[salvadorrya]

All the people who write negative comments need to see how we do it in México 😬, we use 2" By 2" wood piece and some nuts at the front and wala!!!! Is done haha

[kingmeirl]

Aren't you supposed to lower the vehicle back on its own weight before tightening those bushings.... nah, it'll be juuuust fine.