filmov
tv
S215 Tidtid Dupdup IOT and electric pole | KLESF International Challenge 2022
Показать описание
[KLESF International Challenge 2022]
Number: S215
Title of Project: Tidtid Dupdup IOT and electric pole
Name of participant #1: Pawichaya Sombatsompop
Name of participant #2: Emsini Damrongchaliyasee
Name of participant #3: Thannapas Pianchoopat
Name of School: Darunsikkhalai DSIL
Project theme: Sustainable Cities and Communities (SDG 11)
Category: Secondary school (13 - 18 years old).
Abstract of Project:
Traffic problems in various areas causing various problems for the safety of road users One of the causes is that the street lights in some areas are extinguished, or broken, or the light is not illuminating thoroughly. making it impossible to see the way or obstruction Until there are various accidents Which will take quite a long time to fix and waste a lot of budgets
The authors have seen the dangers caused by street lights. and has a concept to fix which is Bringing solar cells to install together with street lights and charging from sunlight to store batteries as backup power. In the event of a broken street lamp, the solar power system will be replaced immediately and there will be an app. An application that can track and notify if a bulb is found damaged to coordinate with relevant agencies for further correction There is also an ambient light sensor. to adjust the brightness of the lamp which helps in terms of saving electricity and increasing the duration of the use of the lamp for a longer time by time when it was dark the lamp will dim and slowly turn on. Increase the brightness by the surrounding area. There is also an application to notify when a damaged light is seen. To be able to contact the staff to be corrected further
In this project, the authors will create a model using Node MCU ESP8266 to receive data and send data via WIFI by connecting to a solar panel as a backup battery and using an LDR Photoresistor Sensor Module to measure light intensity. to select the intensity level of the lamp to suit the ambient brightness and create a web application Figma as an application to report incidents.
#KLESFChallenge #KLESF
Number: S215
Title of Project: Tidtid Dupdup IOT and electric pole
Name of participant #1: Pawichaya Sombatsompop
Name of participant #2: Emsini Damrongchaliyasee
Name of participant #3: Thannapas Pianchoopat
Name of School: Darunsikkhalai DSIL
Project theme: Sustainable Cities and Communities (SDG 11)
Category: Secondary school (13 - 18 years old).
Abstract of Project:
Traffic problems in various areas causing various problems for the safety of road users One of the causes is that the street lights in some areas are extinguished, or broken, or the light is not illuminating thoroughly. making it impossible to see the way or obstruction Until there are various accidents Which will take quite a long time to fix and waste a lot of budgets
The authors have seen the dangers caused by street lights. and has a concept to fix which is Bringing solar cells to install together with street lights and charging from sunlight to store batteries as backup power. In the event of a broken street lamp, the solar power system will be replaced immediately and there will be an app. An application that can track and notify if a bulb is found damaged to coordinate with relevant agencies for further correction There is also an ambient light sensor. to adjust the brightness of the lamp which helps in terms of saving electricity and increasing the duration of the use of the lamp for a longer time by time when it was dark the lamp will dim and slowly turn on. Increase the brightness by the surrounding area. There is also an application to notify when a damaged light is seen. To be able to contact the staff to be corrected further
In this project, the authors will create a model using Node MCU ESP8266 to receive data and send data via WIFI by connecting to a solar panel as a backup battery and using an LDR Photoresistor Sensor Module to measure light intensity. to select the intensity level of the lamp to suit the ambient brightness and create a web application Figma as an application to report incidents.
#KLESFChallenge #KLESF