We are doing our best to provide better customer services and there will be more discount on the factory direct official online store.📷👏📷👏
Stay tuned :)
You can also find us here!
--------------------------------
Please make the intro and music louder, I can't quite hear it.
xirabolt
Here’s what’s going on, if you’re having troubles:
1 + 2. They unscrew the top bar so you can take out the x axis bar (the one in the middle with the extruder) after unplugging any connections that would otherwise not let you take it off space-wise.
3. They use the provided Allen wrenches to unscrew the two screws that connect the bar to the sheet of metal that is connected to the motors. Not well expressed in the video is that they line up the two edges so that it is level, and then they tighten the screws so that is stays parallel.
4. The extruder/x bar is put back on + the connections are re-attached.
5. The top bar is screwed back on
Edit: Worked great on my ender 3D, make sure to tighten it pretty well.
robinsenpai
The awesome thing about my Ender 3 V2, it will always remind me to never buy another Creality printer again. I've spent more time fucking with it than printing.
KhAN
Does it need to be taken out to tighten those two screws?
happydude
so just shake it a little and put it back on?
JS-erte
Worked, unscrew the top as shown in video up to the sort that they tighten screws
Screws are on the FILAMENT SIDE, and are accessible through two small holes in the metal frame by the rubber wheels it made my wobbling so much better still minor wobble like shown in video but was going crazy trying to make it tight
jonathansantorelli
I'm gonna have to try this. The only significant problem I've had with my ender 3pro is the cantilever arm always sags.
thebestSteven
In my case these screws were impossible to tight, so i used different screws but its still really loose, seems like profile is broken :/ its new printer
ZaxstUser
What is being done during step 3 between loosening the two screws and then tightening them again? I guess this is where the critical adjustment is made, but it is not clear.
mcd
I had a slight wobble and tightened the wheel nuts on the right side.
timwright
This will probably fix my problem.... but Don't over tighten these screws! the x-gantry WILL strip. I'm not sure where to get a replacement gantry if I am unable to repair it.
davidsimpson
Nice, this took the slop out of my gantry. Those screws were loose.
longle
Thank you so much never thought I could fix my printer.👍
tavaivanderbeek
Could it be that the nozzle is scratching my print because of the bad x gantry leveling? The printer makes this rattling noise when moving fast. Any help would be much appreciated
konradkodzinski
I tried tightening the 2 screws too much and now they won't stop turning... I think I fked it up
flynn
THANK YOU SO MUCH! This fixed my printer!
insaneinthemembrane
Wow so informative ; (
You guys should really be providing some context with your videos, it will make a big difference, preferably with someone that can speak proper English.
Making a video in fast motion and loud music don't really help the consumer as much as a proper video could.
(A price drop is required on the crx-20, I know it won't happen.
In my opinion people would be better off buying a CR-10S and upgrading to a 2 in 1 from TH3D
Dimitri
This video is about as useful as a poopie flavored lollipop
MrSergeAStorms
I tightened these screws once and they became inoperable... Can get them out can't make them more tight new printer ):( kind of disappointing )
tftg
Dude what the fuck am I even watching? How does that fix it?
