how to test the manual clay block making machine

To test a manual clay block making machine, follow these steps:
1. Prepare the necessary materials: clay, water, and any additives or stabilizers as required.
2. Adjust the machine settings: Ensure that the machine is properly set up and all components, such as the mold and pressure settings, are adjusted according to the manufacturer's instructions.
3. Pre-wet the clay: This step helps improve the clay's workability and makes it easier to mold. Add the appropriate amount of water to the clay and mix it thoroughly.
4. Fill the mold: Take a portion of the prepared clay and place it into the mold. Make sure to distribute the clay evenly and eliminate any air pockets.
5. Apply pressure: Activate the machine's lever or handle to apply pressure to the clay within the mold. This pressure helps compact the clay and shape it into a block.
6. Release the block: Once the desired level of pressure has been applied for the required duration, release the lever or handle to allow the block to be removed from the mold.
7. Observe and inspect the block: Carefully inspect the newly formed clay block for any structural issues, cracks, or deformities. Evaluate if the block meets the desired size, shape, and quality criteria.
8. Repeat the process: If the test block is satisfactory, repeat the process with additional clay to produce more blocks. Otherwise, make any necessary adjustments to the machine settings or clay mixture before retesting.
Throughout the testing process, document any observations, changes made, and results achieved. This information can help in troubleshooting any issues and optimizing the machine's performance.