How to replace 94-97 honda accord wheel bearings

Make sure to wear safety glasses when doing any type of auto repair.

[MadDragon]

I just replaced my hub/wheel bearing on the same wheel. (Same car)
I had to disconnect the brake line to move the shroud to get a grinder in the right position to get at the old inner bearing race off.
Now it's quiet and smooth.
I noticed that it is common for it to freeze onto the spindle.
I also noted that it is common for the race to pit at the bottom and that was causing the bearing to roar.
These instructions are straightforward and right to the point.
But, that inner race is a nightmare for many people.
Some are lucky enough to be able to wrap a wire like welding wire behind the race and then around a metal object and yank it off of there.
That'll work for one that hasn't been on very long.
Another method is heating it up.
I tried with propane but it wouldn't get hot enough.
The grinder.
That works, but once you reach this point it's Do or Die.

[Slidewxyz]

great video! straight forward, easy to follow, thanks guys

[TERRORoftheLORD]

You may want to use a torque wrench, as bearing are picky about how tight they are 🙃

[darbats]

hello what is the size for the bearings? planning to change from 4 to 5 lugnuts..

[davidhenriquez]

does this work the same way for a 98 honda civic?because i heard that i have to take it to a machine shop to get pressurized

[isaakromero]

what does tapping the axel nut with the hammer & flat head do?