How to Change a CVT Belt on a RZR or Any UTV! | SXS Guys

Показать описание

In this video we cover the basics of installing a new CVT belt into your side by side. These same basic steps are the same for all CVT driven UTVs including the Polaris RZR, Can-Am Maverick X3 and others.

Things you'll need to replace your belt (0:15:
1) Replacement Belt
2) Secondary clutch sheave separation tool
3) Socket set to open the clutch cover
4) Scotch-Brite scrub pad
5) Soapy water

Steps to replace your belt:
Step 1) Remove your clutch vent (0:33)
Step 2) Remove your clutch cover (0:40)
Step 3) If your old belt is still intact, verify your clutch sheaves are operating as normal (1:03)
Step 4) Determine the correct secondary sheave separation tool (1:15)
Step 5) Separate the sheaves of your secondary clutch (1:19)
Step 6) Remove belt from clutch sheaves (1:27)
Step 7) Clean new belt with soapy water (1:39)
Step 8) Clean surfaces of the primary and secondary sheaves (1:48)
Step 9) Wipe dry belt and sheave surfaces (1:57)
Step 10) Install new belt (2:00)
Step 11) Remove secondary sheave separation tool and collapse the secondary clutch (2:13)
Step 12) Reinstall the clutch cover (2:24)
Step 13) Reinstall the clutch vent (2:36)

Don't forget to properly break in your new belt!

Follow the SXS Guys!

#sxs #sidebyside #rzr #polaris #xp1k #turbo #yamaha #yxz #articcat #canam #maverick #x3 #general #ranger #rzrlife #sxslife #adventure #utvlife #offroad #offroadlife