CRF250L Airbox Mod

Sub zero temperatures outside mean it's time to come back into the garage for my latest project on the little Honda - this is the CRF250L Airbox Mod...

[TSOL_in_LOS]

Another great video. Accept we were robbed of hearing that pipe again!

Any mod should be followed by a wraaaap of the ole throttle a bit. 😀

[Phuzero]

You can find them in eBay. They are call uni filter air vents UFV-6. Hope that helps out!

[powertooluau]

Hi, Great vids etc etc well done, but didn't see any follow up on the mods that you have been doing, for example $1000 for fmf exhaust and say $50 for the air box mod for a 3% power increase overall and 10% fuel decrease, well I simply wouldn't spend that much for such minimal results but if it was a 30% increase it might be justified. Could you give some sort of 'Performance Rating' to the mods that you have done so as to indicate weather they were doing or not!.... Cheers...Rick.

[TwoWheelTorque]

Hi there, would this mod be bad for the bike with standard exhaust and no EJK?

I'm planning on attempting the work of art I just watched you achieve. However I don't have an EJK (yet!) and I'm worried about the bike running way too lean.

[tahiles]

Can you please tell us the make/model of the bike stand you’re using in this video? I really need one like that. Small and handy!

[dino]

Nice job. Did you adjust the fuel injection after modding exhaust and air intake or is it adjusting itself well enough?

[serieslover]

Great video. Have you noticed a difference in exhaust sound after the mod? Cheers from California

[Dominik_Hollo]

Is it worth doing this to a stock bike? Im only planning to get a muffler, not a full system

[stephendicke]

Do you know if the 2020 CRF250L ABS is dual / twin spark? Do you have any input on: " For the 2020 CRF250L : Does the 305cc Big Bore kit work better with a FMF Q4 & Megabomb or not? Is you bike post 2017? Do you know if the 2020 is dual spark? Do you know of anyone that has dyno'ed the stock CRF250L (post 2017) and with the 305cc Big Bore and FMF Q4 & Megabomb and 14T/40T stock gearing? Does the 13T and/or 42T sprockets / rear tire size affect the dyno readings? Does the EJK for the 305cc BBK improve only by them selves or when exhaust mods are made?"

[sm]

Nice mod, where you get the little filters from?

[NC_RC]

A very tidy job, nice work. How are you keeping that bike so clean?
Also, if I ever meet you, I'm going to have to take that panel off and rotate the filters so they are all in the same orientation.
My chi is being chafed!
;)

[hectorv.c]

Que es lo que utilizas para poner en los agujeros que haces? Podrias pasarme la referencia?, gracias

[Eldwyn]

I love your videos man. Can you tell me what exactly is this mod for? If you already said that in the video i'm sorry i must have missed it.

[pauloake]

Where did you find those filters mate?

[glockguy]

Wouldn't it be easier to just get a k&n or something

[galeaian]

Great Vid mate. Very detailed. Any improvements you noticed with this mod? I just ordered them and am keen to fit them. I still have stock exhaust. Changed the front sprocket to 13T and seen a massive difference for what I use the bike.

[whitefields]

Why would Honda have restricted the airflow in the first place? How did you know this mod (and the exhaust) were necessary?

[ChristopherHayniedd]

This bike reminds me so much of my 1987 xl250r. It even sounds just like it. That bike was bullit proof. Best bike I ever owned hands down.

[drchan]

good thinking I might do this mod to my honda-what issues have you found or know about that restrict the engine power i know about the exhaust system and air filter as you have done so well

[lobosdelaestepa]

You have a very nice channel. Congratulations from Patagonia Argentina